315s with 17x9?

I just bought a set of 315/70r17 and I'm looking at some wheels with -12 offset, will I run into any clearance issue. Wheels i want are KMC Recon 17x9 with i think 4.5 backspacing and Im running a 6in lift. From what I've read it should be fine but I figured I'd get some opinions from you guys

I'm currently on 20x12 brodozer wheels that need to go asap

 

Are you planning on wheeling?

 

Nothing more than river access and occasional offroad trail to a camp area. Don't plan to do any real wheeling as of right now with the truck.

 

Also my daily driver at the moment

 

I dont have that tire size, but to be honest with 35s plan on rubbing at the fenders and at the cab mount

 

I do have 315s, on 16 inch wheels with 3.5 bs, and -38 offset, and I rubbed a shitload until i cut a bunch

 

My cab mount plates are ordered and the fenders have been trimmed since it has 35x12.5 now but going to a narrower wheel and less offset, I don't want to be too close to the spindle or rear shocks, seems those are the 2 areas that will become closer to the tire

 

What UCA are you running stock or an aftermarket. I have that exact same size wheel and offset with 35x12.5s

 

Positive they are factory UCAs

 

You should be ok even ok as DD for not rubbing really as DD just when you flex you may rub with that size loft

 

10-4. Thanks for the input. Havent seen where anyone has had any extra problems besides the usual cab mount and lower trimming of the fenders. We'll see how they fit once i get em in.