What Have You Done To Your 3rd Gen Today?

Will send PM.

 

Just a wee bit

 

Funny, Vin said the same. Yes I do and I'm seeking treatment.

 

Just about finished with my sliding kayak rack! Just need to drill out the stopper pin holes, then take it all apart and paint it

 

If at first you don’t succeed.....

Before:



After:



So, I really do not recommend this mod. The risk v reward is off the chart for not doing this. However it became personal for me. I really wish I’d outgrow that part of me that has to prove a point.

Never give up, never surrender!

Edit: On a positive note, this was good training for the BHLM if that bug bites me.

 

Out of curiosity, how big is that spacer block you put in under the leafs?

 

Are you selling any used bronze Ray10s?

 

Started on my slide for the Dometic DZ75

 

I just bought Fabtech uniball UCA’s. I have Bilstein 6112’s and running 285/75/R16 0 offset. I looked around but couldn’t find anyone else with the same. Just trying to find out if anyone has the same set up and if there’s any rub issues after installing the UCA’s? Or if someone can point me to the right thread haha

 

Three things today...

1) Rear Diff Breather Relocation from @state48overland - https://state48overland.com
2) Installed @KB Voodoo Fabrication Hi Rise Crossbars for Tonneau covers ( planning on a RTT soon ) - https://www.kbvoodoo.com
3) Installed @BAMFTACO Front Bed Corner Tie Downs to help re-enforce the bedsides from the weight of the RTT and additional off-roading - http://bayareametalfab..com

Sorry I didn't get a photo of the bed corner tie downs since I put the tonneau cover back on before thinking of getting a photo.

 

How loud is your truck now?

 

I installed my ARB tie downs and installed the power center with battery meter USB charger and the 12volt cig lighter for the ARB. Seems that all electrical outlets only work with the ignition on. So I direct wired it to my deep cycle battery...

 

Scooped up a scoop

 

Haha was working on physical development & the associated coding for an internal project. Now testing it in-situ so have to go in ~3-4 days a week.

 

Huh? What?

 

I work in bio research and currently developing a device that passively measures multiple variables & reacts appropriately if certain thresholds are met to bring said variable back within desired range.

I was handed this project just before the shutdown occurred and all of the writing of the program and physical building of the device I could do remotely. But I'm now testing/wringing out bugs with it in place where it'll be used once its fully developed.

 

Its so beautiful! great job! I really dig the green, might have to give this a shot.

 

Got my caliraised center console molle panels Installed, and rigged up a phone dock for Android auto. I had the radio already from a previous vehicle.

 

Got my front windows tinted this morning @ Accent tint and graphics.