Pace Edwards Jackrabbit with Max Modular KB VOODOO racks

Anyone out there install the KBVOODOO Max Modular racks and have the Pace Edwards Jack Rabbit bed cover? I’m thinking of pulling the trigger but don’t know if the tonneau brackets will fit with my bed cover due to my canister location and rails on my P.E. JackRabbit Bed cover. KB voodoo doesn’t know if it will fit or not. A close up photo of the tonneau brackets by your bed cover canister and rack system (towards the front) would help me out greatly. Thanks in advance.

 

Post some pics of the canister and it might help us determine if it will work.

People use the Switchblade all the time, but I'm not sure how much different the Jackrabbit is.

 

I hope this helps there’s about a 1.5 inch clearance between the side wall and canister, a little over 1/2 in between factory rails and side of canister. The clamps can be moved back if needed. The canister is 11 inches deep front to back. Pls let me know if you need more photos and angles. Thank you.

 

Another angle

 

The jackrabbit rail is 4.5 wide from the top

 

Our tonneau brackets are 3/16" thick, plus the head of the bolts stick out about 1/2", so we need less than 1" between the canister and the factory accessory rails.

 

The way it works with the Switchblade and even Retrax, is our tonneau brackets go on first, then the frame of the cover goes over them.

There's a few pictures in here if that helps: https://www.max-modular.com/shop-max-modular/tonneau-brackets

 

Looks like I’m just shy of over 1/2 “ space between the canister and the factory rails. I’ll have to get a bracket and test fit it before buying the rack. But it looks like it will fit thanks.

 

A test bracket is cheap insurance, but I think you're good to go.

 

I have the same question did you ever determine if it would work?

 

Yes it works. I use pace Edwards jack rabbit works perfectly

 

Awesome! Thank you!