Is this a good price for work

Valve cover gaskets - Part #11213-62020 - 2 Total
2. Spark Plug Tube gaskets - Part #11193-16010 - 6 Total
3. Intake Plenum Gaskets - Part #

$16 17176-62040 TOYOTA Genuine Air Surge Tank to Intake Manifold Gasket

17176-62040 - 2 Total
4. Washer Seals - Part #90210-05007 - 16 Total
5. Camshaft Plugs - Part #11188-62010 - 2 Total
6. Halfmoon Plugs - Part #11183-62010 - 4 Total
7. PCV Valve Grommet - Part #90480-18001 - 1 Total
8. Spark plugs and wires . 9.fuel filter replacement. 10.transmission filter exchange and replaced pan with new one all that for 600 just labor is that a good price for just labor

 

Seems fairly reasonable for removing the valve covers and dropping the trans pan.

Are all those things bad, or are you just going around replacing a bunch of gaskets?

 

All Data labor times:
Both valve cover gaskets. 2.9hrs
Intake manifold gaskets. 3.6hrs.
Trans filter. 2.8hrs

So, $600 sounds reasonable.

 

I'd skip the pan drop. A drain of the fluid will remove 90 percent of the particles on the screen ( it's not a filter) when the fluid back flushes out the drain plug.

 

The thing is I did just drain the fluid but I over tighten it and it messed up the threads and started leak I did try to take of the bolt but it just keeped on spining

 

Valve cover is leaking and transmission bolt the threads are messed up and just keeps on spining and it's leaking so I might as well change everything

 

Then yes, $600 is a good price.

Be aware that they are going to ask if they can change the transmission pan because of the messed up drain plug threads. That could get spendy.

 

Yeah I kinda already bought a new one lol but could I retap the old one and have it in case something like this happens again

 

The $600.00 in labor is not bad the bottom line is if your happy with the end results.

If things are done incorrect or poorly even $300.00 is to much.