Hood latch

Hi there
Anyone tried using hood latches for front anchoring a canoe?

 

$10 Seattle Sports Sherpak Hood Loop Tie Down Anchor Straps for Mounting Kayak and Canoe on Car Roof Top (Black)

https://www.amazon.com/Seattle-Spor...ywords=canoe+hood+strap&qid=1599184529&sr=8-5

I recommend these, I use them for the bow lines on my kayaks.

 

Thanks
They are secure and don't scratch vehicle?

 

I'd use some kind of clear film where the straps contact the paint - I drove 3,000 miles to Tetons and back with the kayaks on top and there was a bit of wear on the clear coat. I'm going to put a little bit of it around the edge where the strap is.

As far as secure, they're fine for security bow lines, but I still use my OEM and Thule Xporter racks as the primary strap down points. I wouldn't use the hood bolts for primary straps, that's just me. They're all little 10mm bolts.

 

Thanks for this. Will definitely use roof rack. Shopping for one at the moment. I like the clear film idea. Which rack do you prefer? Any favorites? And more importantly are they noisy when not in use?

 

I've got the factory rack on the cab, and then the Thule Xporter that mounts to the bed - here's what my setup looks like:



Works great for both 'yaks, and keeps them at a low profile. I want to get a canoe soon - I will probably use the same setup to carry one.

The factory rack on the 3rd gen is the same as the 2nd gen, and it's fine for what it is, and its cool party trick is when you're not using it you can fold it out of the way so that it's aerodynamic and thus zero wind noise and drag. It's rated to support 100lbs max (dynamic).

Here's what the factory rack looks like:




A lot of people go with the "prinsu" style rack. I've never had one but a lot of people swear by them - they're very versatile. I don't know about wind noise on these - maybe someone with one can chime in on that.
https://prinsudesignstudio.com/

Other companies make a similar design, Frontrunner, ARB (I think).

 

Thanks Big Red Taco! You have been a lot of help! Much appreciated. I'll look at setting up same as you. Enjoy trekking!

 

Be careful with the Toyota rack if you have an early 2020. They moved the shark fin antenna and it interfered with the rearcross bar. They moved it back later in the run.

 

Thanks for this tonered. Van u recommend one? .

 

Good job dude. Helpful and concise

 

DIY nylon straps on the fender bolts, pretty easy, they fold under hood when not in use.
That's our 16ft Prospector on a Prinsu;

 

Did the straps damage the paint job?

 

I have been looking for the factory rack and it seems even the dealer couldn't find it? I'm in Canada. But you would think I could order it online????

 

Nope, they come up through the hood crack and you close it on them;


I've had them for 12 years now on our subaru and no paint damage at all..
Rather this than putting a rope up over the front to the bumper- no question.

 

I'm looking for the rail rack.

 

I like the hood latchvoption
I'm ordering them. Now to findbthevright rail rack for the roof super cab. I just cant put my hands on one. Thanks for your help with the hood latch. Much appreciated.

 

Your looking for this;
PT278-35130

Get a price from your local dealer, watch Marketplace or Kijiji, or check these sites;
Shipping is not going to be fun to us here in Canada.

$361 Toyota Genuine PT278-35130 Roof Rack

https://www.amazon.ca/Genuine-Toyota-PT278-35130-Tacoma-Roof/dp/B00K6LQ55C

https://www.oempartsource.com/oem-parts/toyota-2017-2020-tacoma-double-cab-roof-rack-pt27835170
https://www.toyotapartsdeal.com/oem/toyota~roof~rack~tacoma~13~pt278-35130.html

 

I'll look those up. Is it the one that fold into the rail rack?