What Have You Done To Your 2nd Gen Tacoma Today?

Fresh alignment, wheel rotation and balance.
Then a walk w the kiddos

 

Six speed, yep.

These are the viscosities and grades the manual states. DOT3 fluid for brakes and clutch.

 

Nice bumper. I did not know an option like that existed. How are you thinking of attaching the rear license plate?

 

Hows the wind noise , I want one but I drive on the highway often

 

Thinking about attaching it will one of those flip up brackets.

 

Redoing the harness for my remote start. Didn't like how I did the last one (too many connections).
I bought a new t-harness (THAR-ONE-TOY2). I'm de-pinning the wires and moving them around so the colors better match my

$70 Viper 4115V 1-Way Remote Start System

Viper 4115V.
I'll have to add one wire and a relay for 2nd starter. Looking over wiring diagrams now.

 

Nothing to the truck today, but did run to the range and put a few hundred rounds down range.

 

Ha! I ordered a set of ridge grapplers on Tuesday. Supposed to be delivered on the 8th. I can't wait for the quieter ride. These trail grapplers are driving me nuts!

 

I’d like to do this has I’m completely blind on one side. Where and what wire did you tap in to?

 

Is that all etch primer? You DO know that etch primer is to be just a light, almost transparent coat as an adhesion coat for the painted topcoat, right?

 

What headlights are those? They look dope!

 

Oh, I was gonna say you've got a couple of zip ties you have grown attached too

 

Installed the slim satellite radio antenna cover. Was a bit more involved than I wanted it to be because I didn’t have a stubby 22mm wrench. But it’s in.

also ordered a set of steelies

 

https://tacomabeast.com/collections...-projector-headlights-light-bar-drl-version-2

these ones here man

 

A few days ago but got the truck detailed.

Seats are still a little wet here.

 

Wish my Rosie was a manual. Yours sure cleaned up nice.

 

Nothing but blocks and spacers but that wasn't my point. A full size truck should have no problem pulling away from a mid size truck, especially if the mid size truck is stock with big tires.

 

I wanted that bumper but you can’t really tow with it :/ Not sure if you said or not but when/what ratio are you regearing to?

 

Yeah it's just 3 light coats like the directions on the can say ... the Rustoleum self-etching always seems to go on with better coverage compared to other stuff.

 

4:88s