Lifting to fit 285/75/16

What parts came with the stage 4 icon lift kit?

 

Nice wheels! Care to share the brand?

 

https://www.bilsteinlifts.com/shop/...stage-4-wtubular-uca-2016-2017-toyota-tacoma/

Front coilovers with res (spring already mounted on shock)
Rear shock with res
UCA
Add a leaf with new u bolts

 

Mickey Thompson Sidebiter 2

 

I didnt want to change ride quality but I wanted a little bit of lift. I went with the 1/2" spacer (1in lift) from Headstrong Offroad in the front and their 1" cast block for the rear, but i may end up changing that to an AAL, mainly for extra support when my bed is load for family trips to our mountain cabin. For tires I went with 265/75/16 Falken Wildpeaks. I also put on 1.5" Rough Country hubcentric wheel spacers. I had a slight rub up front when I would turn into a incline (pulling into my driveway). On flat the didnt rub. I just trimmed the front bumper a little and relocated the wheel well liner to a different preexisting hole.

 

Did you happen to measure before and after installing those front spacers to see if they did give 1 inch more of lift?