MISC small items for sale - various

Hi, have a few things and will continue to add to this post/thread as I uncover more.

I am absolutely in favor of bundle deals and combined shipping.

no loss tire valve caps - $10 shipped.


Trailer harness replacement. - $50 shipped.
If you have scraped your trailer harness, and broken the plastic body of the 7 pin plug like I did, then you need this. The dealer wants something crazy like $200 for this part. However, the Honda is the exact same plastic body with different length wires and that is what this is.

Genuine Honda 32113-SJC-A00 Trailer Sub-Wire

https://www.amazon.com/gp/product/B00P44JQMU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
So you can dissassemble the OEM toyota plug on your truck, to get the wires/connectors out, disassemble this unit to use the full body, and plug all the toyota wires into this body and then you are brand new again. There are a few write ups on TW for this with good pics. I didn't end up using this because I bought a high clearance rear bumper that uses a different kind of trailer plug anyway, which I spliced my wiring for.


Sheet metal rear fender reinforcements, lower bedside to bed - $10 shipped.
These are the parts that you don't need anymore when you cut the bedside for high clearance rear bumper.


OEM fuel pump, with filter, suction tube, harness and pressure pot - Free if you pay shipping
This is what you are left with when you upgrade to a high flow aftermarket pump.


ARB compressor switch face rocker, new, not broken clips (not complete switch) - $5 shipped


Fog light bulb, with bulb holder and harness pigtails - free with other purchase


2 flat wiring connector / extension. Good for making waterproof disconnecting electrical connections - free with other purchase


Front airbag crash sensor, tested working. I bought a replacement but turns out I had a pinched wire causing my airbag light issue. Double checked with this sensor and my original
sensor, both worked to keep the light off - $10 shipped.


Diff drop spacers with longer bolts. From Toytec. $15 shipped.

 

bump - bunch of new things added

 

bump, make offers

 

Interested in ditch switch and on/off switch

 

Bump for a good seller!

Travis, BTW, I got those metal skids mounted up Front one seemed to fit a bit wonky but once I cleaned out all the threads and used some c-clamps to help align the leading edge it bolted right up. Gas tank skid is up next but I'm thinking I may hold off on that till my tank is closer to empty.

 

For that skid, put the 4 main bolts in and leave slightly loose. Then put in the front bolts and you may need to use a jack or clamp to be able to draw it all the way up to the frame. Then tighten remaining. It came with spacers for the front, I don’t know why it was made that way but I slotted the holes to allow it to draw all the way up to the cross member.

Good luck with it all!

 

Ah, OK, that makes mores sense now. I had thought maybe it hadn't been bent quite properly. What you explain is basically what I did except I used c-clamps to bring the leading edge up to the frame - worked great!