BAMF High Clearance rear bumper "Modular DUAL swing out"

And the 16 plus Dual swing is on the group deal this week. https://bayareametalfab.3dcartstore...arance-Rear-Bumper-Dual-Swing-out-_p_151.html

 

really curious about towing with the dual swing arm and a spare mounted on the back. i suppose your trailer would need a long tongue

anyone got pics or experience to speak on that?

 

Yes if you are running a tire on the back you will have to account for it sure. I've never seen anyone needing an extension with a trailer running a tire on the the back of the truck as most trailers have a long enough tongue.

 

any ideas of measurement how much higher the hitch is with this bumper than a stock hitch position. Does it relocate it say 5” or so inches higher?

also, is it possible to order without cut out holes for backup sensors my truck doesn’t have them and without the bedside protective tube?

 

About 7" oc higher than stock. and if you want no sensor holes just put it in the comments when ordering.

 

@JLee Ahh I ordered mine about a month ago, too late to say no sensor holes?

 

Yes you can just reply to the email confirmation. It could add time depending if we have any sensor-less skins without cut and not started.

 

Doh! Already pulled the trigger on the labor day sale. Oh well, savings is savings, still super excited and well worth it either way!

 

i didn't have my OEM license place lamps so i picked up these on Amazon. they plug directly into the stock harness. quality is ok. i hope they will be waterproof for a few years. i have a 2012.

needed to trim a bit of plastic with an exacto to get them in there.

$14 VIPMOTOZ Full LED License Plate Light For 2005-2015 Toyota Tacoma & 2000-2013 Tundra Pickup Truck, 6000K Diamond White, 2-Pieces Tag Lamp Assembly Replacement

https://www.amazon.com/VIPMOTOZ-Ass...dra+license+plate+light&qid=1600546343&sr=8-7

 

Solid bumper! Thx BAMF!
I made this a project my family would not forget and could be proud of. They all had their turn and fun cutting the bumper before I made the final cut.
Pix is my 13yr old.

 

lil kid in me in screaming with excitement

 

Daaaaaamn Daniel!

Hows the squat on that taco after loading up with all that pure American Beef?

Seriously, I hope your suspension is sorted.

 

I’ve been running HD rear leaf springs for the past year with no weight. With the rear bumper just sitting in my bed my suspension finally feels right, also i’m about level now! Hopefully I can install this Sunday to get a better idea how it’ll look!

 

That’s some serious goodies right there

 

I probably missed it, but what edge trim are you all using?

 

Good morning! Until BAMF produces a license plate bracket, what are our options for a compatible flip-up license plate bracket to utilize the hitch?

Also, has anyone relocated their rear camera? I think BAMF is working on a bracket to help relocate. My spare tire blocks 98% of the view.

Thanks!

 

I got this:

 

IT FITS PERFECTLY

 

Fitment looks good! Mines on the way..any advice where to make the cut? I know bamf hasn’t officially released a write up yet ..

 

See but if I tell you, that’s cheating and means you won’t have to put the hours of measuring as I did lol.

Totally joking! I used someone else’s method from earlier on. I got a piece of lumber and used it to measure from the top of the bed sides 17.75 inches down the side. I measure at multiple points then used tape to make a line.

I then used a grinder and cutoff wheel to make the cut, it cut really easy. I saw some people took off their fender flares, I left mine on, also with the inside liner, didn’t have any issues. I only had it on for fitment, just took it off to get it painted.



OH, biggest thing.. have help. My buddy came over... this is NOT a one man job, and I applaud anyone that even attempts to do it by themselves!

The stock bumper/hitch took some coercing to get off. After than we used a couple floor jacks and jack stands to help us mount it.