2019 3rd gen tire selection for TRD PRO

Swapped in some 2020 PRO suspension and might as well change the tires before i get it aligned again. Any recommendations for tires that can fit a 2019 OR rim? Thx guys

 

265/75/16 falken at3w

 

Same size I have but Cooper STT Pros

 

265/75/15 Falken Wildpeak AT3W
Or
Goodyear Wrangler Duratrac
Or
BFGoodrich KO2

I personally prefer Duratrac

 

315/85/16 if there are only straight lines in your future. It'll look sick

 

Awesome thx looking them up meow

 

stock 2020 TRD pro suspension. Was able to stuff some 285/70r17s with very little trimming and some heat gun action.

 

Looks awesome, what was the heat gun used for.
What brand of tire are those

 

Good looking truck man. What tires are those?

 

BFG KO2's

 

• 265/75/16 ridge grappler

 

K02s

heat gun is used to soften the fender liner so you can bend it and push it away from your tires where they would normally rub.

 

Very I'll be picking up a 2021 Pro in Manual soon and was wondering if 255/75/17 Cooper STT Pro's would fit without trimming? Same wheel and tire set up I currently have on my 2nd Gen

 

You could get the cousin of the cooper STT pros... mastercraft MXTs. 265/70/17

 

Toyo at3, cooper discoverer at3 or the good ol' bfgs.

 

I’ve heard nothing but good things about the tall/skinny tires. Was thinking of going 255/80/17 myself

 

I love them

 

Would’ve went skinnies but got a deal I couldn’t pass up on with these 285s.

 

will 255/80/17 fit a stock 2019 OR rim, and without trimming. Even when the pinch weld is trimmed i think its still going to rub on certain conditions, just dont want to go through that mess.

 

https://www.tacomaworld.com/threads/the-skinny-on-skinny-tires.529656/

Pretty sure I read that you can fit 255/80/17 or 255/85/16 on stock suspension without rubbing, but will also depend on which rims you’re running. (Offset plays a big factor)