2007 Reg Cab 4X4 5 spd

Just bought my truck and registered here. It's pretty much a stripped 4X4 truck with A/C. I'd like to upgrade a bit and install intermittent wipers. If I buy the stalk switch is it just a plug and play install with all of the required wiring already in place? Or do I also have to run extra wiring? Also checking out some bucket seats to replace the bench. That seat back angle is not real comfortable on my back.
Thanks for your input.
KentuckyEd

 

welcome Ed- you'll find a great group of ppl here and a ton of mods. If you search the forums, you'll find a thread for what you're looking to do, and I believe that if I read correctly, it's plug and play for your truck. I believe I read it to be pre-wired and set up for intermittant. Click on "forum", then "2nd gen" and then on the top right should be a "search" feature. Type intermittant wipers and it should pop up. Or, you can look at the top for the "mods + tutorials" and it should be in there too.

 

As a matter of fact, to get you started, copy this link- it's the search for intermittant wipers in the 2nd gen forum:
http://www.tacomaworld.com/forum/search.php?searchid=1622632

Have fun and let the modding begin!

 

Thanks for your replys, I'm already searching and finding the intermittent wiper threads.

 

welcome ed....theres a ton of good info on here anything ya do a search for and cant find no mattr what ya try just ask. someone will usually have the answer or a link to get ya the answer