1st Gen Tacoma sliders with options and prices.

Would it be possible for you to post some pictures of where it is welded to the frame? I'm curious if you had any trouble with your body mounts?

 

I’ll try take some pictures tomorrow if I don’t forget

 

@ForestRunnerFrank99 here is a picture, keep in mind I have a 1” body lift too.

 

Thank you! If you look at mine you'll see I have some stupid body mounts in the way:


I either hit the one in the front or the one in the back.

 

Are you using same sliders? That sucks, best bet is to put them in the correct location and relocate one of the sliders legs.

 

Yeah same as you, 80" 79-95 pickup sliders. I guess Toyota changed how the body mounts to the frame between '99 and '02. You're right I'm gonna have to move the front and rear legs so they don't interfere. I even called All-pro and they said the legs were the same distance apart on each model, the only difference was that front leg that was longer. I guess the person I talked to didn't know what I was asking.

 

Looking at your frame the front mount looks the same but the rear is set closer. I think this is because I have the double cab and yours is extended cab. You should only need to relocate the rear support of the slider.

 

Makes perfect sense. Ill probably move the rear leg forward so it sits in front of the body mount.

 

Hey guys,
So will this HACK

("All-Pro Off road Rock Sliders (2001-AP-80) for the 79-95 Truck 86-024Runner.")

WORK for MY 1998 tacoma extra cab? Would be nice to save some $.
Thanks