taction control 2013 trd tacoma

i just purchased a 2013 tacoma with a 6 inch lift.It all seems to be tight and done right. I just had the front wheel bearings replaced,and an alignment done.The reason for this is the truck wants to kick in the vsc and or traction control during a sweeping 30mph curve and is quite dangerous. Ihave reset the yaw sensor and recalibrated and still does this. Can any one help point me in the right direction. the wheels ar 20X12.5.

 

Sounds like a bad (improperly installed) front wheel speed sensor. The wiring may also have been stretched (damaged) when the lift was done.

 

Thank you will have it checked. About at my witts end

 

Welcome to TW

 

Welcome aboard

 

Welcome to TW!!

 

My 2013 seems to be having the same issue as you kaseynae.

I just purchased my 2013 Tacoma TRD a month ago. It already had a 2" lift on it when I bought it. But every time I go around a LEFT curve it's like the wheels or steering lock up! I have had it looked at twice and haven't really found a good solution. Any advice???

Thanks!