Front sagging w/ 5100s

Set to 4th spot on the shocks up front. Difference front to rear is 2.5". Warn winch, SSO hybrid bumper, RCI skid trilogy. I am guessing that I need to go to new coils. Which ones and what setting on the 5100's to level it back out?

 

Wow that’s a lot of sag

 

Try pairing them with beefier springs

 

Eibach coils IMO

 

Which ones? OME 888? Which setting on the shocks will be warranted by Bilstein with non stock coils?

 

Adding non factory or non Bilstien equipment will void the Bilstien warranty on your 5100s. That being said, it's totally your choice to tell them what springs you had installed IF you make a warranted claim.

 

Not sure on a third gen. Hopefully someone else can answer that for you

I'm not as heavy as you in the front end and mine is a 2gen. But im running 885 on setting 0 with the 5100s

 

Will void warranty with aftermarket coils. Spoke to bilstien direct about this before I choose lift

 

That sucks

 

Yeah, it sucks. Noticed how bad it was on a trail run as my nose plowed into an obstacle it should have cleared.

 

886

 

The stock springs have the highest weight rating at just over 700lbs.

 

Different guy. Mine are on stock springs with 5100s set to the 4th spot. I'm thinking I need the 886 springs on the stock setting. But the OME site says their springs will not work on the same shocks that handle stock springs??