MARYLAND TACOMAS

It's crazy what you can buy & own in WV. 20mins and your walking out of the gun store with a new pistol. None of that Md BS! And i just learned that in WV you can buy & sell without a 3rd party involved.

 

The heck is that first fugly dohickey?

 

Everybody, wish @Jim=2015 TRD PRO a Happy Birthday!

 

Thanks Rob, but definitely going to go HID’s. I’m taking a break from spending money on the truck until January.

 

Ok, just to see if I could find what size bulbs they are, I went to diodedynamics website. It looks like your front turn signal bulbs are 3157

https://www.diodedynamics.com/front-turn-signal-leds-for-2005-2015-toyota-tacoma-pair.html

Looks like the rears are also 3157

https://www.diodedynamics.com/rear-turn-signal-leds-for-2008-2015-toyota-tacoma-pair.html

Most likely though, just replacing the bulbs will require load resistors. That's why I went with the ones I bought for the front. They came with them installed in the wiring harness.

Which ones did you order on Amazon? What do you mean by the "the plug was too fat and not long enough"? The male end on the bulb?

 

WAIT, WHAT!? TODAY IS JT'S BIRTHDAY!? I hope you are taking him out to dinner!

HAPPY BIRTHDAY DAD @Jim=2015 TRD PRO AND MANY MANY MORE BROTHER!!!!!

I used the Book Antiqua font because, well.......... it's classier, like you James.

 

It's a polymer addition that converts the handheld pistol to a more stable (less shaky for me) platform. I will continue to practice as is but since my accident last year my dominant hand shakes more and more as time goes on. I need to see a neurologist about it to see if there is anything I can do about it. I hear CBD works and my neighbor said a friend of his was much worse than me, had some sort of operation to his brain and was like new. I am not going that brain route.

 

I'm down

 

Spotted at the SHA HQ parking lot today. Anybody in here?

 

Haha now that I read that was a terrible description of the them. Yea the male end of the bulb to the female end on my truck. Ill see if I can post a photo. Im about to check out the links you posted though! I got these from Amazon,

ENDPAGE 7440 7440NA T20 W21W Built-in Load Resistor LED Turn Signal Light Bulbs, Anti Hyper Flash and CANBUS Ready Error Free, 25W High Power 1000LM Extremely Bright Amber Yellow (Pack of 2)

https://www.amazon.com/gp/product/B07V829HQF/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1 from what I was able to see via amazon they appeared to match the factory bulb male end. Its crazy I cant find one with the load resistors already in the harness for the second gen.

 

Help,got a pulley squeeling bad, been doing this since I’ve left Dave’s. Tried lube, cleaning, water. Still super obnoxious.

 

We need to find you something like this.

https://www.ebay.com/i/372358103993...5HtYZ3eeebP5_tM_b-OYrCerlBIcAAVMaAlCyEALw_wcB

but in a 7440 to 3157 fitting.

Edit - It looks like it is also considered a T-25 wedge base.

http://www.autolumination.com/visual_bulb_finder_t25_wedge.html

 

Did you try belt dressing?

 

Yes! I wouldnt of even thought they would have an adapter like that. good looking out!

 

Sounds like its time for a new belt. Take a long flat head and put it on the idler pulleys and he tensioner and listen for a humming noise.

 

Got a link? Sounds like it might be interesting to try out myself! I would be careful with the CBD if you do decide to try that route, brother. It's still a very greay area between various state and federal concerns. There is also debate as to whether the NICS question regarding drug use refers to CBD products.

 

Google micro roni. Should come up with tons of results.

 

Not tok shabby! Are they they only manufacturers?

 

Here's where I found one for the Polymer 80 but they have them for Glocks too, with a free flashlight.

https://caagearup.com/product/new-mck-43-43x-48-preorder/

Yea, I would only do something THC free, legit, and with a prescription