Falken at3w with 6” lift

A lot hating and no real advice. Smells like TacomaWorld.

 

Should have gone with 8 inch blocks imo. Front and rear.

 

Nah, size matters. 8 inch is still too small

 

Hey TW judgey virtue signalers. Here's how to help someone and/or not be a dick.

1. Do I have information that can help this guy? No? Stop. Go back and keep browsing other threads. Yes? Offer relevant help like this:

OP, you have 20x9 0 offset. A 20x9 0 offset is 5" backspacing and is in excess of the specified 4.5" backspacing. This is why you are rubbing. You need to find a wheel with 4.5" or 4.25" or 4" backspacing. Nothing OVER 4.5". This is going to be like a negative offset in a 20x9. So like a 20x9 -14mm to -18mm.

 

You're a day late, this has already been pointed out.

 

LOL noooo I like the 6.5” lift but the wheel honesty looked small I might just keep it and add spacers like the others said I could of gone 35s but I don’t have money to regear yet

I can possibly make a video later where the rub occurs under the truck just hopefully I don’t accidentally run over my phone

 

They are 20x9 0 offset

 

This is the 4” block

 

People telling him it's dumb are helping him out. Don't take it so personal. It's quite the rabbit hole and that should be pointed out.

 

It’s dumb to want to lift your truck?

 

Over 3" is not dumb if you have lots of money to throw at it. If you don't then yes it's dumb.

 

This is where it rubs the most

 

Current build in progress going to switch the 20x9 with a 17x9 -12 offset and dropping the lift to a 4/2

 

Stawwwwwppppp


This looks awful

 

Thanks

 

It does not look awful.

 

It is time..