Ontario BS Thread

that's the last thing i can possibly do, so it's something i have no other choice but to check.

besides that as a mechanical issue, only electrical issues can exist

-Something is forcing a large load upon startup
-the Confuser is trying to communicate with the key itself to actually let it start
-there is a tiny module right beside the driver seat that is bolted to the floor under the plastic panel (not sure what it does or why it's there) but it might have had some mud seep inside.
-fucks if i know
-Can be literally anything


With this said. Anyone have a spare starter motor?

 

After some good years with very little maintenence, it's time to give her some much needed tlc during the winter. Need a new leaf pack. Cracked leaf and it's flattened out.
Picked up the AllPro expedition leafs.
Also, I was looking to install new UCA's because I can't stand the open uniball on the TC. I need new bushings. Just learned I could swap out the uniball for the Icon sealed joint. Didn't know that they actually make a retrofit.
Thanks @pete37 for all the goodies.

 

Thats a sweet bumper... You get in Sarnia?

 

That's the Warn bumper right?
Cooper ST MAXXes for tires but what size? What lift did you go with and did you rub?
Prinsu rack up top?

Looking solid for a rig

 

Yeah, I got it and the FabFours rear bumper at the local Carquest on a no tax day. They ended up being the cheapest around, even cheaper then getting it across the river in Michigan.

Yes, Warn semi-hidden winch bumper and I changed up to the 5100's with OME coils and a progressive add a leaf. I had some very minor rubbing that was easily fixed by just pushing that inside plastic back an inch. Minor trimming and repositioning the one retention screw.

Right again on the ST MAXX! They are 255/85/16's on SCS SR8's. Prinsu with the Caliraised slim light bar, SDHQ dual behind the grill light bars, Morimoto HID's and Kustom54 amber LED fogs (true amber LED and not film). I'm also running almost every MESO mod, from the turns, stage 1 tails, ultimate maps and dome, molle rack, start button, vent, climate and basically his whole interior blackout kit, ECT always on, 6 switch overhead panel, Canadian version of his bucket coin holder and the left 4 switch panel where the cubby hole was.

I've also done a few other things but they are basic upgrades, like the the A/C drain relocate and speaker upgrade, and I have literally no chrome left but in the stock headlights. I went so far as to get a complete set of 4 highlander handles instead of the black overlays and I picked up a mirror know from a Sienna at a local junker and they are all direct swaps.

I've done a few other things but I can't really remember them all.

 

Installed a couple of D-rings on the bed cubby bolts for light-duty use. The D-rings have 1000 lb WLL stamped on them (yeah right).

EIGIIS Cargo D Ring Tie Down Trailer Anchors Hooks with Bolting Hole 8PCS 2" Diameter Black Steel D-Ring Mount Trailer Anchor Straps with Clips Secure Cargo Tiedowns with Heavy Duty (8PCS)

https://www.amazon.ca/gp/product/B07GJJNZMG/ In conjunction with the OEM bed cleats, the D-rings will hold up a Jeep cargo net acting as a soft bed divider.

 

255/85/r16 club! I got the same tires on ProComp 69 series with no lift, i rub whenever i turn and hit a speed bump...


The Highlander handles fit the Tacoma? That's a new one for me. Like i know we share the same engine but the door handles too?
The new Rav4 mirrors fit into ours without issue in case you want the fancy blind spot portion added to it as well - but hey, that's hella neat to know. Gotta love it when manufacturers use similar parts across their line ups.

 

Yeah, the set of 4 Highlander interior black handles cost me maybe $80. For the door mirrors adjuster knob, I could probably find exactly which Sienna model is the direct swap for black, I'd have to go back through messages and posts. I absolutely despise chrome...

 

I use the ones I attached back there all the time

 

You got a pressure washer already? Have this attachment? https://www.homedepot.ca/product/ryobi-water-broom-11-inch-pressure-washer/1001029363

 

oh fuck ya bud!

That is exactly what I want for my Dad's pressure washer!@

 

Curious to here what you think of the all pro leafs. You had the dakars before?

 

Yeah Dakar HD on there now. Once I get it on I'll let you know how it performs. I have approx. 700lbs daily in the rear so I'm hoping these can manage the weight. I think that's the reason the Dakars flattened.

 

Damn that’s a lot. Heard good things about the expedition pack.

 

I wanted to ask @tacoma16 if i could borrow his... that is a perfect attachment for washing under the truck..

 

If you come over to use it and wash mine.....may need more then a day for mine though....almost made @Norilsk cry yesterday when he saw my engine bay

 

seeing his interior, exterior and engine bay is horrifying experience. Don’t wish anyone to experience that....






Stock AF bumper caps

 

And one more


Now need to find good rock or tree to test it

 

Any 3rd gens out there!

If you need a full set of skids (victory 4x4-3/16ths)

Baja lights that bolt into the stock fog location

And a few other things that I’m probably missing


PM @zuknewbie
Just bought a winch from him! Great guy!