Dobinsons Tundra Options (1st & 2nd Gen)

**Updated 1/11/2024

Hey Guys. I've had quite a few Tacoma guys recently ask about what options Dobinsons have for the Tundra (old and new), so I'm going to break it down here with each part so that it's all easier to find for anyone in the future.

Tundra 2000-2006
Front Coils
C59-300 - 2" Lift w/stock weight, 385/385mm free height, 586LB rate (requires new upper coil isolator)
C59-302 - 2.5" Lift w/stock weight, 2.0" Lift w/110-175lbs added, 395/395mm free height, 586LB rate (requires new upper coil isolator)
C59-344 - 2" Lift w/bumper & winch, 370/370mm free height, 650LB rate (uses OE upper coil isolator) - Same as 1st Gen Sequoia front coils

Front Struts
GS59-222 - Twin Tube Nitrogas struts, 2" body, 465mm ext, 365mm comp
IMS59-50222 - Monotube adjustable height (threaded body) struts, 2.2" body, 473mm extended, 335mm compressed lengths
MRA59-A222 - Monotube 3-Way Adjustable Remote Resi struts (coilovers), 2.2" body, 473mm extended, 335mm compressed lengths

Rear Shocks
GS59-940 - Twin Tube Nitrogas shocks, 2" body, 614mm ext, 361mm comp
IMS59-50940 - Monotube 2.2" body shocks, 14.2″ compressed length, 24.2″ extended length
MRA59-A940 - 3-way adjustable remote resi monotube 2.2" body shocks, 14.2″ compressed length, 24.2″ extended length

Rear Leaf Springs
Sorry, Dobinsons don't offer a replacement leaf pack or add-a-leafs for this generation

Rear Quick Ride Kit (blocks & u-bolts)
QR59-552K - Quick Ride Kit, 1.2" lift blocks with caster correction built in and new u-bolts
QR59-551K - Quick Ride Kit, 2" lift blocks with caster correction built in and correct length u-bolts

Individual item page: Tundra 1st Gen (2000-2006) Archives | Exit Offroad


Tundra 2007-2021
Front Coils
C59-778 - 2.5" with Stock weight (662LBF/in spring rate)
C59-610 - 2.25" With bumper and winch weight (737LBF/in spring rate)
C59-780 - 3.0" with Stock weight (662LBF/in spring rate)
C59-578 - 3.0" With bumper and winch weight (662LBF/in spring rate)

Front Struts
GS59-710 - Twin Tube Nitrogas struts, 2" body, newer extended length to suit 0-3.5" lift heights
IMS59-60710 - Monotube adjustable height (via clip) 2.6" body shocks
MRA59-A710 - Monotube 3-Way Adjustable Remote Resi coilovers

Front Diff Drop Kit
DD59-530K - For 3"+ front lift, reduces angle on CV joints

Rear Shocks
GS59-711 - Twin Tube Nitrogas shocks, 2" body, suits 0-2.5" lift heights
IMS59-60711 - IMS Monotube rear shocks, 2.6" body for 0-2.5" lift heights
MRA59-A711 - 3-Way Adjustable Remote Resi Monotube 2.6" body shocks for 0-2.5" lift heights

Rear Leaf Springs
L59-120-R – 4 + 2 Leaves, Raised Height (55mm, 2.25″ Lift) Heavy Duty for stock to medium loads
L59-121-R – 5 + 2 Leaves, Raised Height (55mm, 2.25″ Lift) Heavy Duty for heavy constant loads (300-770LBS+)
L59-122-R - 5 + 2 Leaves, Raised Height (55mm, 2.25" Lift) Super Heavy Duty for 1000LBS+ heavy constant load (truck camper, etc)

Rear Quick Ride Kit (blocks & u-bolts), instead of leaf packs
QR59-551K - Quick Ride Kit, 2" (50mm) lift blocks with caster correction built in and correct length u-bolts
QR59-552K - Quick Ride Kit, 1.2" (30mm) lift blocks with caster correction built in and correct length u-bolts (new in 2020)

Rear U-bolts
UB59-437K - Sold as 2 pairs, enough for 1 truck

Rear Greasable pins/bolts and Shackles
SP59-060 - Sold in pairs, designed for fixed end of spring but can be used on shackle end also to add easy greasing
SK59-076 - Greasable Shackle Kit

Leaf Spring Bush Kit
PB59-1102K - Contains all required 6 bushings for both ends of the leaf springs plus the shackle hanger

Every individual item page: Tundra 2nd Gen (2007+) Archives | Exit Offroad
Full kit pages: Full Kits - Tundra 2nd Gen Full Kits

 

Tundra with 3" front comfort coils, 2" quick ride rear and SPC upper control arms

 

Both of these have the same 2" front and rear suspension with full leaf packs.

 

Hey Guys

For the month of February 2020, Dobinsons is running a free Air Compressor deal with a full suspension kit purchase. While supplies last. Here are the details.

Purchase a full Dobinsons suspension with twin tube struts and shocks, and receive an AC80-3808 Air Compressor free with your order. $145 value
https://exitoffroad.com/product/dob...ressor-kit-with-bag-hose-and-gauge-ac80-3808/

Purchase a full Dobinsons suspension with new Monotube (resi or non-resi IMS) struts and shocks, and receive an AC80-3846 Dobinsons Zenith Air Compressor. $325 value
https://exitoffroad.com/product/dob...ressor-kit-with-bag-hose-and-gauge-ac80-3846/

The free item will automatically be added to your order, no coupons or anything required.

Regarding the IMS (non-resi) and MRA (3-way adjustabl w/resi), ETA's are variable on those products, so your order won't ship right away, but you'll still get the deal. You will be emailed an ETA when the order is placed, or can ask up front.

 

Mike, Im looking at doing a dobninsons kit for my 06 tundra. its 4x4 with the a double cab. I plow with it a couple times a year. would you go with the 302 or 314 springs? Since I only use it a couple times a year for plowing I was thinking about getting the 302s and maybe adding timbrens to the front. also, does dobinsons sell the top plates for these shocks and can they assemble?

 

With that sort of front leverage, I'd suggest the C59-344 as long as you have a V8. No, we don't do the top mounts, as there are different sizes depending what coils you order, and therefore they can't be preassembled before shipping.

 

Thanks for your post. I was just telling myself I need to think about replacing my front assemblies. Haven't decided if I want to level the truck or not.

Thanks again for showing the options.

 

Just added the new 1.2" rear quick ride block kit to the first post.

QR59-552K - Quick Ride Kit, 1.2" lift blocks with caster correction built in and correct length u-bolts

Also for the 2nd Gen Tundra's, I put together a new kit page with front struts and coils, rear quick ride kit and shocks, all on one page. It's here: https://exitoffroad.com/product/dobinsons-tundra-2-25-to-3-0-quick-ride-kit-for-2007-2020

Full 2nd Gen Tundra kit with leaf springs and everything is here: https://exitoffroad.com/product/dob...-toyota-tundra-2007-to-2020-double-cab-4x4-v8

 

I have a few questions for you, all pertaining to a 2nd gen Tundra.
Is the 3” coil not designed to work with an aftermarket front bumper and/or winch?

Have y’all figured out why some people are getting ~5” of front lift from the 3” spring?

With the 2.25” spring + .25” spacer+ aftermarket front bumper and/or winch, it would net 2.5” lift?

Any ETA on when the MRA/MMR kits will be available?

thanks for your input!

 

I've just edited the first post with the current front coil options for the 2nd Gen Tundra, just announced last week. Dobinsons had some incorrect info on their 3" front coils, they do require a bumper and winch for the coils C59-578, so they've made 2 new options.

2.5" with stock weight
3.0" with stock weight

When settled, they were getting about 4" over new stock height with those original 3" coils with stock weight.

The new MRA's and IMS options are in the works, won't be any earlier than the end of this year that they might be released.

 

I know a lot of Dobinsons coils are sold out right now, but there's a price increase next week, October 1st, on all coils!! Any orders placed until then, even if they're on backorder, will still get the current pricing.
Just a heads up!!

 

I have a 2003 AC with a winch and bumper added. I have 5100s with stock springs and the lift was at 2.5” prior to the winch and bumper. After the additions I lost an inch but I do like the ride. Would you suggest the c59-344 to get back the inch or would I ruin the ride since I have the V6? Any info would be appreciated!

 

You could run the 344 coils with the 5100s set to the lowest height and it should be about 2.5" or so on a V6 I think.

 

New front IMS struts are coming for the 1st Gen Tundra in December, I'll post up more info shortly on this.

Adjustable height, fully threaded body!!

Edit: Here's the info

IMS59-50222 - IMS struts, fully threaded 2.2" body, 2" piston, 465mm ext, 365mm comp

 

Just updated the first thread with all the updated options now that the full IMS kits are out for both generations.

 

Dobinsons Black Friday sale is running all November long, starts today!!!

Full details are here:
https://www.tacomaworld.com/threads/dobinsons-sale-all-november-long.782692/

 

Updated the first post with all the updated info, new shocks and leaf springs that are available.