265/75/16's with Ray10's on stock tacoma

I am looking to put 265/75/16 tires with ray10's on stock tacoma. I can not do a lift kit or cab chop because of my warranty on the truck (can't wait till that warranty is over haha). The ray10's have a 12mm offset. Would this combination of wheels and tires with no lift rub? Thank you for any help guys!

 

Yes it will.

 

So I would need to do a chop with this setup?

 

I had this setup for awhile, it only rubbed on plastic and really only when hitting bumps while turning

 

it will rub a little as shutup mentioned because of the -12 offset. No lift, try 0 or -6. I think either would look better (IMO) vs -12 that pokes out too far which makes the kinda skinny 265s even more noticeable.

 

I had Ray10s with 265s for a while at stock and it looked great, only rubbed a bit on the mud flaps. If you want them I say go for it.