Rancho quicklift

Hey guys , swapping out my stock bilstien struts with 3 inch spacers for rancho quick lifts .. wondering if anyone has been down that road and if I’ll need a .5 or 1 inch spacer for the same height ..

Thanks

 

Imo. If your wanting 3” of lift there are better options out there. Toytec, OME etc.

 

Hey thanks for nothin gotoman !

following up for posterities sake in case anyone finds theirselves in a similar situation , since all quicklift searches come up with hood strut stuff ...

I went with .5 inch spacers on top of the Rancho quicklifts and everything worked out great, if anything I’m just a smidge higher in the front then I was because I have absolutely no tire rub anymore

I have 2 inch blocks under the back and I’d been running stock blisteins with 3 inch spacers for the last 100,000 miles ..

 

Well I’m glad it worked out. Truck looks good.

 

Thanks

 

Do your inner CV joint boots look like this?

 

Dunno , did new axles , wheel bearings and lower ball joints while I was in there replacing the struts ( 200,000 mile reset ) On each side ...

guess I didn’t pay attention to that ...