What else?

Ok so I have a 14 taco v6...103k miles. Today replaced front shocks with 4600's, (staying stock) and stoptech rotors with akebono pads. Rebuilt calipers (looked good and new seals are cheap) and braided stainless brake hoses. Tomorrow doing rear 4600 shocks and ss hoses, as well as cleaning throttle body and maf, new pcv, coolant, and gates belt kit (pulleys/tensioner). Anything else I should do? Did diff fluids and plugs 20k ago

 

grease the fittings on the driveshaft and inspect the carrier bearing since you're going under the rear

 

Tranny fluid replacement, with the hose style, transfer case also, how does the coolant look? If you're doing all that brake work, drain all the fluid out and replace, going to have to bleed them anyhow....