Bilstein 5100

Looking to pick these up soon, just have a few questions. These are plug and play right and don’t need anything else? Also I have a leveling kit on my truck right now with stock or shocks, should I leave the leveling kit on or take it off?

 

Take it off

 

Do you know if they are on stock springs?

 

Stock. See those marks

 

If those are coils off a stock tacoma then you may want to keep your spacer lift otherwise you'll lose your gained height when you swap these in. Even if you replace the shocks, stock coils will keep you at stock height.

 

Stock

 

Which setting are those sitting on?

 

Person you bought them from can’t give you what they are set at stock coils or not ? Just wondering

 

have not bought them and i am not sure.

 

Definitely ask bro. If stock coil ask what setting. Or if they have them set at stock with aftermarket coil like OME or Eibach. Let us know so we can help

 

I just got some 5100's with OME 2880 springs for my gen 1 taco. I assume I want to set them at stock setting and not preload them?

 

I asked and he said all the way up

 

Ok so you will need to do aal in rear. You will be nose high without anything in rear or a 1” or 1.5” block your choice. Imo do aal. Also you will need an alignment.