Methanol 4.0

I'm guessing as long as the throttle body is closed that the turbos don't draw a vacuum so it shouldn't be a problem. Unless you want full meth cutoff until a certain amount of boost is reached.

Disclaimer - Not really a turbo expert, just a good bullshitter

 

I'm thinking dual V3 nozzles set to 500ml/min with progressive system. Really would like to do it, but with braided stainless lines. Would be so sick.

 

I got hard

 

I'm gonna do it. I'm literally on the verge of setting up the tuning appointment for my car right now.

 

Do eeeeet

 

does anyone in here have their water/meth nozzle mounted in a TB spacer/plate?

 

@White lightning boosted did it at some point. Not sure if he's still running it. I believe a solonoid is needed to keep vacuum from sucking meth out of the nozzle when the throttle is closed.

 

Starting around this page there's some discussion about.

https://www.tacomaworld.com/threads/methanol-4-0.554164/page-27

 

Good find, that was exactly what i was looking for.

I was wondering if the nozzle had to be flush with the end of the plate or if it can be slightly recessed- it looks like there it can be tucked in a little. I am going to try to fab up a TB spacer for my 4 cyl to mount a water/meth nozzle in.

 

Might be good to see what your nozzle spray pattern looks like and then go from there.

 

I think thats a good idea for sure. If it is less than ideal, i'll try taking the dremel to the edges and open it up a little

 

I bought the snow performance solenoid just to be safe so it didn’t feed into my motor with out me knowing. It didn’t last 1 year. Everything else works great. Just deleted it. But you will need of ur after throttle body.

 

Alright, well i've been rethinking the nozzle mounting. I got ordered an extra 2.75" silicone coupler that goes before my TB and i am going to drill a hole in that and use a Snow nozzle mount like pictured below. This should eliminate the need for a solenoid and also keep me from needing to tap into the intake piping. If this doesnt work, i will pursue the throttle body spacer further. Hopefully everything comes in for this in the next few weeks and i can get this done and go to the stage 2 pulley.

 

Does anyone know what % methanol the 0*F Supertech stuff at Walmart is? I did some research but couldnt find anything

We almost never have the -20 stuff locally

 

Edit: Sorry, just noticed on second glance you're looking for 0*F not listed below. Havent seen that info either.

 

No MSDS info available online for Supertech?

 

I found one for the -20 but wasn’t able to track one down for the 0 degree stuff

 

Search "windshield" on this site:

Looks like less than 23%

 

Thanks man! I need to work on my searching skills it seems

 

No problem I was looking at some of these a couple months ago when I installed my system, but didnt realize the 0°F still had methanol