Ontario BS Thread

i heard that the Stagshop sells soft shackles, could convince her that way

 

i need to overhaul my sliders, cut them up and extend them out another 2-4 inches from where they are. they're too close for my taste after running about at ardbeg
hopefully reinforcing them will let me sleep at night

and i need to rewire my rear locker...

 

The @MESO ultimate white map lights came in a couple of days later. I used the tape method to pull out the bulbs without dropping the overhead console.

 

Here's a $50 bucket for you to shit in: https://www.mec.ca/en/product/5057-602/Loadout-Bucket



Of course it's part of a "system" so you can buy add-ons, like a $40 clear lid: https://www.cabelas.ca/product/102910/yeti-loadout-lid

 

This needs to be a give away at next years trail cleaning event.

 

Did this with the gf a few days ago, as well as underneath the underseat storage. I ran out so I didnt do every nook and cranny.Do I notice a difference? a little bit, not much. I'm considering overlapping a 1/4 inch layer of neoprene/closed cell foam, since I don't want to pay for MLV.

or I'll save my 50$ and just live with it. Probably not even worth doing unless i tear out the entire interior...

 

We picke dup 2 or 3 of those at the last one, with the fancy lids too, that we threw out

 

+2 bonus mall crawl points for a #2 in the deuce bucket, at the mall.

 

If you make the drop while in the RTT, does it count as an upper decker?

 

Absolutely. And the clear lid is for bragging rights.

 

Sometimes I like to admire what I accomplished

 

No recall notice yet. Almost time for an oil change and 32K service before winter.

 

I did the whole interior. I think it was worth the time and effort. My truck is a daily driver so the comfort level is important to me. I used Noico 80mil sound deadener and then Noico 315mil foam on top. Back panel, all floors, and doors. Noticeable and huge improvement. Still working up the guts to do the headliner. Maybe springtime...

 

I would buy the lid and hope the pale of paint I have fits with it.

 

I notice a lot of people add sound deadening to their trucks? Are things that loud or am I missing something? Maybe I need a test drive to compare. Seems quiet enough I think.

 

I think it's more to stop reverb and excess noise from the speakers. Trying to get cleaner/tighter bass that doesn't rattle everything

 

Found a independent local shop here in Ottawa who apply Corrosion Free. Had it done today and they did a great job. Thanks @llamasmurf @daks and @tacoma16 for the advice!

 

https://www.spreadshirt.ca/shop/des...lable=XyYgQVv2kqigBvaXbAb4-210-7&appearance=2

 

LOL my son and I both have this shirt. I bought to please the wife... she was impressed.