Transmission questions

The transmission in my 2001 toyota tacoma sr5 quit so I bought a trans from a 2001 4runner sr5 and everything is the same but my tacoma trans has manual kick down and the 4runner trans has electronic but has a spot for manual kickdown cable... I switched the valve body out and electronic harness out of my tacoma trans into 4runner trans and everything lined up will this work??

 

@BartMaster1234

@gearcruncher

Either or both of these guys can probably help you out when they see the thread

 

Okay I went ahead and swapped the valve body and internal harness for shift solenoids everything lined up including all the bolts holes I just need to know is there anything else I would have to change for this to work

 

It sounds like you have everything lined up. @gearcruncher can confirm

 

@BartMaster1234 Praise jesus I had everything swapped over already before asking that question I just wasnt sure if that was gonna work I just assumed it would since there was a place for a manual kickdown on the 4runner trans it just had a removable plug in it.. So I'm gonna put the 4runner trans in my tacoma tomorrow and see how everything goes thanks everyone

 

I suppose the only thing you can do is test it out. If it doesn't work - start diagnosing problems.

 

Yes, guys have done this valve body swap in the past and the transmission shifted fine afterwards .
Good luck with the install .

 

Well good news guys I finished the swap and the trans from a 01 4 runner worked in my 2001 tacoma..and like myself and others have said in previous comments for it to work all i had to do was change the valve body bc of my truck having a manual kickdown and 4runner having an electronic kickdown

 

Can you elaborate on how you swapped the valve body, where you got it from, and how difficult it was?