DFW BS Thread : ********NEW MEET!! CHECK POST #1*******

Carrier bearing 5002007 and Qty 3 of U-Joint

$32 5-1330-1X U-Joint Kit

5-1330-1X are the part numbers I used last week. There are some other u joints that will work, but one is sealed/non-greaseable and another has the zerk fitting in the middle of the u joint instead of on the end cap like stock. Some say that the one in the middle disperses the grease better, but I replaced mine to be like stock.

 

Thanks a bunch man. Dealer wanted me to charge me an arm and a leg. Hope this resolves my issues

 

Drivetrainamerica.com should have all of it in stock and they shipped to me really quickly.

 

Anyone have a ECGS carrier bearing removal tool I could use? Finally got the vibration.

 

Sold the white one this morning. Just ordered some ATH bumpers

 

I've got a whole kit with a magnetic tool to help line up the tool in the diff, seal puller, bushing driver kit and perfect size pvc cap to drive the new seal in without damaging the lip on it.

 

Does anyone here have a hook up on Trail Tech products? Looking at a Voyager Pro but i dont wanna pay 600 for one.

 

That would be awesome if I could borrow it! I can pay you to use it. I won’t be able to do it until winter break so sometime in December.

 

No payment required as long as I get it all back. Just let me know when you want to meet up for it.

 

i do, for a 1st gen though. Not sure if it’ll work.

 

Is said vibration intermittent and felt in the steering wheel wobbling?

 

Mine was more of a cyclic vibration through the floor and gas pedal around 25mph-30mph. It was specific to that speed and not really intermittent that I remember.

 

I had the same as Jim.

It also went away in 4wd.

 

Al Baker's and Chaparral are my go-to for that kind of stuff.

 

Exactly like Jim but at 35-40mph. Goes away in 4x4