2014 TRD Off Road - Will 265/75/R16 fit?

I have a stock (super stock) 2014 TRD off-road access cab long bed 4x4. I'm looking to put wheels and slightly bigger tires on it (Method 304 or similar). The current tires are 265/70/R16, put on by the previous owner and on the stock 16-inch wheels. Will 265/75/R16 tires fit without needing a lift or hacking away at sheet metal? And will these tires make the truck look any taller or bigger? It looks small compared to many other Tacoma's I see around town, but most have at least aftermarket wheels and tires, if not an obvious lift. I don't want to lift it just for looks, I love the current comfort and driveability of it. I want this truck to be capable off-road but I don't plan to do anything too serious with it. I also am having a really hard time finding K02 A/T or Toyo Open Country's that are 265/75/R16 AND rated for the truck, rather than the E rated tires, which if I'm not mistaken, is way overkill and will have stiffer sidewalls than is correct for this truck. Any answers would be appreciated.

 

Nevermind, I just seen you were changing to Aftermarket wheels.
I don’t if they will rub. OEM wheels shouldn’t rub thought.

 

That’s what I was hoping, I’m new to this site and just found the tire calculator. I’m guessing any bigger than 265/75r16 will need a slight lift.

 

Check my previous post, I didn’t realize you were going aftermarket wheels.
They still probably won’t rub. But some may.

 

Good to know, what would have to be different from the stock wheels to change that? I plan on putting aftermarket 16inch rims on the truck. I was looking at the Method 304’s. My guess is if I get wheels with the same offset as stock then they won’t rub, but I don’t know what the stock offset is.

 

https://www.tacomaworld.com/threads/wheel-specs.30754/

 

Thank you

 

I did some quick googling, and I cannot seem to find aftermarket wheels that are 16x7, 6x5.5 bolt pattern, and +30mm offset. Do I have a measurement wrong?

 

Sorry for the influx of questions, but would putting a wheel with an offset of 0 make the tires rub? If I understand correctly, they will stick out further than stock, not be pushed in further right?

 

Try here for wheel info
https://www.tacomaworld.com/threads/wheel-backspacing-and-offset-info.102992/

As for what wheels work?
I don’t exactly know, I only know what will work on stock wheels.

Hang around a bit, there are some really smart guys on here.
They probably even know the names of the particular wheel.

 

Thank you!