2021 TRD Sport AnytimeBackupCamera Kit Issue

Hello. I'm having an issue trying to get the AnytimeBackupCamera Full Kit to function on my 2021 Tacoma TRD Sport (without
Navigation or Premium Stereo) and was hoping someone else may have experienced similar issue.
I purchased directly from Anytimebackupcamera.com and even called first to verify which Full Kit I needed and was sent the FullKit that is labled 2020 sticker on it.
The kit seemed straight forward and "believe" I have everything hooked up correctly but wondering if maybe the ABC28 harness is not pinned correct for this model.

Everything plugged in and wired up according to my best understanding.
When hooked up normal truck operation is fully functional including OEM Reverse camera.
The Switch Illumination center light is also functional when i turn on the headlights (although i think this is due to it getting the ilumination voltage from the Blue and Grey feeds)

However... Toggling the switch does nothing for factory reverse or new front camera. Where I've made it in troubleshooting is switch is not getting a power feed on the Red 12v wire that comes off the ABC28 connector harness. From what i
can tell this should be the 12v feed to the switch. Out of the ABC28 harness there is the braided sleeve that goes to the switch containing the Red and Orange wires. However, when the truck is running or aux on the Red 12v wire does not have any voltage.

I know the kit is a sound solution so I'm hoping maybe its just a matter of pins being off for the 2021 vs 2020 or maybe something dependent on the type of head unit, idk.
Unfortunately I soldered every connections thinking the wiring was going to be in place for good and to remove this from how i routed thru the dash I'm just trying to see if there
may be a solution to swapping pins around in that ABC28 pin connector first. But I've not been able to find any online 2021 Tacoma wiring diagram for that to even begin to guess what pins are what.


*** U P D A T E ** 11/27/20 **
As expected the kit is quality and works with the 2021 fine where the issue was a bone head mistake i made how I had the connectors connected. The owner of AnytimeBackup camera was helpful and pointed out that i had the connectors swapped to the wrong side of the video harness. Greatly appreciate his support and would highly recomend his camera kits for these trucks.

 

Adding ics to show connector and where it came wired that doesnt appear working on the 2021 unit.