What Have You Done To Your 3rd Gen Today?

Welcome to TW Jacob!

 

Welcome to TW Bud!

 

Nice work!

Mine is mounted between the battery and the headlight (driver side of course).
I mounted a flat diamond-plate shelf to the truck which is longer than the battery. Sat the batt on top of the plate and secured it with factory mount j-hooks.
For the part of the shelf extending past the batt, I added 4 "belt loops", and strapped the

$98 Viair 88P Portable Compressor Kit (12V, 120 Psi, Forup to 33" Tires)

Viair 88P down snug.

Bonus is that the Viair attached hose reaches all four tires from there. The pax side rear must have the valve stem at the 2'oclock position though. But I have extra hose on board if needed.

And yes, everyone stops to offer help when I have my hood open to air-up.

 

Has anyone done an Aero Turbine Exhaust on a Gen3? All the posts I can find are for Gen2s. Basically just looking to see whether I would need a pro to install or if I can do it in my driveway.

 

Spotted a 2022 Tundra???

 

Can't beat that classic box design now.

 

Its that time of the year again! Added some Christmas lights and a Wreath ontop of the @BAMF grill.

 

Looks good. After sunset they'll be pulling over thinking you're Five-O.

 

Trail ride in my 2020 in Idaho.
https://youtu.be/b8MkVdMOplI

 

These T-nuts are priced per 1x unit. I've ordered many.

 

Power wagon??? Cummins or hemi?

 

What do you use to secure the lights along the bed and tailgate?

 

Grandma said speed this thing up.

 

Sadly I would get pulled over for this in my state of PA. There are laws about which vehicles are permitted to have blue lights.

 

Forward facing red lights are also an issue, especially if they are blinking.

 

Is that with your phone or the beacon?

 

Is this near Sun Valley or Soldier Mountain? Looks like some parts of the drive are through old burn scars.

 

Plugging into the bed outlet?

 

Finally got of rid of the chromed out tail lights. Also installed the MESO Total Tail kit while I had the lights out.

 

Anyone have better recommendations for bed rail cleats than the plastic OEM ones? I just don’t like the semi circle shape / thickness. They work fine most of the time but some bungee hooks and tie downs don’t fit around them.