2020 Tacoma OEM LED Headlight Megathread

2016+ Tacoma Plug-N-Play headlight conversion harness for 2020 OEM LED Headlights - NOW AVAILABLE!!!

 

Sylvania 7440a Zevo LED with the rear firing LED’s (old design has forward firing and isn’t bright). 7443a will work too, I’ve tried both, just make sure to get the rear firing version.

 

My only assumption is that people are impatient and because he’s not a TW member the moderators can’t directly talk to him so they shut it down. They’re made to order, take about 2 weeks, and there’s tons of happy customers on here. Patience is a virtue and it’s become less common in a world full of immediate gratification and 2-day Amazon deliveries.

 

You used ambers in the rear?

is this them?

$20 SYLVANIA - 7443 T20 ZEVO LED Amber Bulb - Bright LED Bulb, Ideal for Park and Turn Signals (Contains 2 Bulbs)

https://www.amazon.com/dp/B01MZHFBKP/ref=cm_sw_r_cp_api_fabc_nuMXFbVSJ6S34

 

LOL my bad that was the front! Blonde moment I used 7443R for the rears.

$20 SYLVANIA - 7443 T20 ZEVO LED Red Bulb - Bright LED Bulb, Ideal for Stop and Tail Lights (Contains 2 Bulbs)

https://www.amazon.com/SYLVANIA-Bright-Ideal-Lights-Contains/dp/B01A77U5P0

 

Thanks, gonna pick some of these up, will update if they don’t hyper flash in mine since my came stock with LED headlights. Phillips hyper flashed for me

 

Do you have MESO ultimate turn lights in your mirrors? If so, I'm pretty sure they have resistors in them so people should consider that with your comments. I'm definitely not an expert on electrical stuff but figured I'd add this.

 

I have Meso turn signals but I had hyper flash with them before installing the resistors. Why would the Meso mirror signals have additional resistors? The stock mirror flasher is already LED. Can @MESO confirm this?

 

He'll have to speak to why but it is noted on the product page: https://mesocustoms.com/collections/toyota-tacoma-3rd-gen/products/ultimate-turn-signals

 

I’ll wait to find out from Meso but maybe this is a new addition to his Ultimate Turn Signals? I had his turn signals way before converting everything to LED’s and I had to pick up some Sylvania load resistors to fix the hyper flash with the OEM headlights and the Meso Ultimate Turn Signals.

 

I got Mike’s wire harness arriving Saturday and my Headlights arriving tomorrow. Already have the oem led fogs installed.

 

I just sent the money to Mike last night for my harness

For the headlights did you go with TRD Pro or just the Standard LED?

Which OEM fogs did you go with, the kind that come from the Tundra and what not?



Part #

$149 Toyota Genuine Parts - Led Foglight Black (PT413-42191)

PT41342191?

 

I went with the TRD Pro Rigid lights, cause they look better.
But the standard LED fog lights perform far better than the Rigids.

 

I wonder how far off the color is of the OEM Fog lights

$149 PT41342191 Toyota Genuine Parts - Led Foglight Black (PT413-42191)

PT41342191 and the OEM LED....

 

I went with the standard and the Tacoma led fogs. Got them from the dealer i got my truck from and fogs off Amazon.

 

Well without Meso Ultimate turns, Sylvania doesn’t function the same way for me. I still hyper flash without load resistors. So there is probably a resistor in yours.

 

Just got home from the dealership from picking up the headlights and mikes harness was sitting in the mailbox. Going to install first thing in the morning. Top notch work on the harness and headlights look soo good in person.

 

Awesome!

Please take any notes or tips /photos for me!

Good luck and enjoy!

 

Here is how to do it the hard way.


Pro tip: don’t install the headlight inside the metal, make sure it slides into place on the outside where it belongs. In other words, pay close attention to the outside edge and make sure it is lined up while you slide into position. Speaking from experience (had to drop the bumper a second time once I realized my mistake). I’m pretty sure I’m the only bonehead who did that though.

 

Have you had issues with condensation in the headlight?