What Have You Done To Your 3rd Gen Today?

I bought the mountain hatch on sale as well. I went with the black/red combo. I didn’t receive any extra screws though. Mine seem to be tight enough but I’ll probably get in contact with the company to get some. I also ordered the pop lock from R4T and installed that at the same time. Love that I don’t have to use the little key to open the tailgate anymore.

 

Hey same here but I went with the 5 and a SAE connector in the grill so I don't have to open/close the hood each time. I only drive it to the grocery store on Sundays

 

Seems to be quite a few of us that don't drive the Tacoma much. 30 days away from owning 5 years and it might, maybe, possibly hit 26,000 miles by then.

 

Fuel pump recall done. Very exciting

 

Really like that clean look!

 

I'm curious as to whether you have experienced vehicles not starting due to cold or if this is just proactive/preventative. I ask because the climates you both are in appear to be mildly cold as opposed to brutally cold.

 

I had my battery replaced last winter. It was still under warranty due to truck not having 60,000 klms on it yet.

 

Cosmoline is nothing like rubberized undercoating. I sprayed a thin coat (because I had only 5 cans) and it's clear. If you lay it on thick, the coating turns amber but is still transparent. There are some before & after pictures here: https://www.tacomaworld.com/threads/rust-veto-342-cosmoline-undercoating.651180/#post-22805203 The poster used RP-342, which is another cosmoline-based spray.

 

Proactive on my part; it's a 2020 and thanks to Covid I save a lot of money on gas (just rolled up to 2900 miles since 4/30... wooo). I definitely don't drive it enough during the weekend to fully get it replenished so rather than face issues a year or two down the road, $32 seemed like a cheap preventative thing. If I drove it daily, I would've never considered it.

 

Cosmoline, same stuff Europe coated surplus rifles with to preserve them. It's a Bitch to get off the rifles and especially the wooden stocks as the wood soaks in a bit. Quick fix for that is to place the stock in the dishwasher and run it until the heat comes on then remove it. Almost ALL the Cosmoline comes out of the stock. Use a steam gun to get the remainder out. Ask me how I know....

 

Installed the Redline hood struts. The riveting was riveting!

 

Yes, the ChiCom rifles are coated with them too, as are the ChiCom brake rotors.

Resistance to washout is the reason I chose cosmoline for undercoating. It might even last a couple of years before needing reapplication. After wheeling, pressure-wash the truck. The dirt comes off while the cosmoline stays on.

 

Are those dual USB ports? Those, are nice, where did you get those?

 

Finished one of the last utility mods before the “because I’m cool, bro” list can begin!

 

Bro you are tied for best handle on TW lol you and @dal3_gribble for the win!

 

Haha! Thanks, it was my name on Facebook for years until I became a real estate agent

 

Led fogs and headlights.

 

Not a weather issue, its a not driving it issue, retired last year and moved closer to family, COVID cancelled all my trip plans this year, no need to drive it but once a week. Took it in a couple weeks ago for the fuel pump recall and it almost didn't start at my house had been getting worse for months, they put it on a charger for 3 hours and that solved the problem along with the trickle charger now makes it a happy truck again. 2019 with only 13K miles on it.

 

Holiday mod! Xmas light usb cord to my hondo mounted iPad

 

It comes wrapped inside a giant cardboard box on a palette. The cover edges have a full seal around the entire unit, neoprene I think, plus another bag with a roll of sealer tape in case you need more or if you have edge caps and it doesn't fit smoothly. The weld seams are beautiful, all made in USA. Very sturdy, I can see how it will easily support 2 ATVs. Rated for 1600 pounds carry. Plus the instructions are illustrated and actually written in English! The longest time was spent on getting the locking bars properly placed. They fit inside the bed rails but can't touch the inside bed wall when locked. I read that part several times before it finally clicked. Got 2 sets of 2 keys (4 keys total) for some reason, but extras will go in safe so whatevs.