Mating connector for DRL harness

https://www.diodedynamics.com/plug-and-play-drl-headlight-harness-for-2016-2019-toyota-tacoma.html

Looking for the connector to mate to the green one in this harness.

Contrary to the q&a section that says this won't work with raptor lights... I'm going to try it .
I have a different connector style I could use, but I'd rather keep this part whole.

 

Something like THIS?

 

The raptors I got came with a harness. Incidentally they have the red and yellow connectors for each light, vs what you posted having the red and yellow at the drl harness side.

They only have bare wires for power.

 

I made @daveeasa one kind of like this. Using the R4T as a template, I incorporated it into a LED conversion harness. So he has one harness that goes from TRD headlights to the OEM LED headlights, and has the connection for the raptor lights. Anyway, long story short, Here is what you are asking for: Deutsch DT 2 Way Receptacle Connector | DT06-2S | Ships Same Day (deutschconnectorstore.com) Though I am not positive if they work with the "B".

 

So, your lights have this at each light?

So you have 3 or 4 of those connectors you need to adapt to the deutsch?

 

Sounds exactly like the cheapo ebay grille lights I have. I bought a set of connectors (probably ebay as well) and soldered + heat shrinked to make something compatible with the R4T. Or maybe I used solderless heat shrink connectors, can't really remember.

Haven't had a chance yet to plug in @Puppypunter 's one piece harness but it's on my list to confirm it all works lovely.

Working on gaining weatherproof crimping skills but not quite there yet. I did just get my set of depinning tools though.

ETA: I just slapped on a compatible connector on the bare wires and used only the T part of the R4T harness, still have the 1-4 splitter harness in my box of parts.