Wheels that will fit now and work with lift later?

I want to get "future proof" wheels for my 2008 TRD Sport before I get my lift if possible? I'm prerty set on my new wheels. Right now I'm running 265/70R17 tires on my stock 7.5" deep wheels. Haven't decided on a 3" or 6" lift yet just due to money and JUST bought the truck a month ago. So question is, what size wheels to get that would look right when lifted and offer me the larger tire choices (after lifting). I won't be doing any super serious off-roading, if that helps. Looking at possibly the Kumho Venture M/T KL71 as my first tires after.

First thought was the 17x9, but with the 0mm offset and 9" width, will they fit my truck without spacers and the existing 265/70R17 tires before I add the bigger tires and lift?

Mickey Thompson Sidebiter Wheel Specs:

Part # Size Appx.Weight Bolt Circle Back Spacing Offset(mm) Load Capacity Replacement Cap

158411 15x8.0 24 6x5.5 3.31 -30mm 2,000 401517

150411 15x10 28 6x5.5 3.5 -53mm 2,500 401517

168412 16x8.0 26 6x5.5 4.5 0mm 2,500 401517

179412 17x9.0 30 6x5.5 5 0mm. 2,500 401517

 

you are going to want 4.5" backspacing (backspacing is calculated using rim width and rim offset). With 4.5" backspacing, you can fit 265's now and switch to 285's once you lift.

The only ones you posted above that have 4.5" backspacing are the 16x 8's.

The 15's won't fit your truck at all due to brake caliper rubbing. some aftermarket 16's will also rub on the calipers so I'd check to see if anyone has these particular wheels in the 16x8, to be sure they don't rub the calipers.

The 17x9's have 5.0 backspacing. You'll be able to fit 265's with those, but will need wheel spacers to run 285's.

 

Thank you. I'll go with the 17s than and than run Spidertrax when I get my 285s. Have you seen the wheels? What do you think? Mines Super White as well. Gonna turn the white tire letters in on my current tires.

 

The problem with that is that the 17's have 5.0 backspacing.

If you get spidertrax, which are 1.25", that will effectively change the backspacing to 3.75". That will be too little backspacing (stick out too far), and the outer edge of the tires will rub the fender while turning.

 

So I really looked today and not close to narrowing down. Although sizes are all 17x9

Pro-Comp
8188-7983

$227 7031-7983 Pro Comp Alloys PXA31 17X9 6X5.5 F-BLK -6MM - PXA7031-7983

7031-7983
7105-7983
7005-7983

KMC XD766 Diesel W/PXD76679060300

Motometal MO951

M/T Sidebiter 179412

 

Do all those have about the same specs for backspacing?

 

New List w/ Back Spacing

Pro-Comp
7032-7983 - 4.75"

$227 7031-7983 Pro Comp Alloys PXA31 17X9 6X5.5 F-BLK -6MM - PXA7031-7983

7031-7983 - 4.75"

ATX Thug - 4.51" or 5.34"

M/T Sidebiter 179412 - 5"

 

My voye is the thugs in 4.5" bs. Love those rims.

 

My vote is the thugs in 4.5" bs. Love those rims.

 

Pro Comp 7005
17x8, 6 on 5.5 Bolt PatternBackspace = 4.5 in. Max Load = 2200lbsFinish = Flat Black Hub Centric = NoOffset = 0mm
or
17x9, 6 on 5.5 Bolt PatternBackspace = 4.75 in. Max Load = 2200lbsFinish = Flat Black Hub Centric = NoOffset = -6mm

 

Both of those will work.

 

Went with the

$171 Pro Comp 7005-7883 Pro Comp Alloys PXA5 17X8 6X5.5 F-BLK 0MM - PXA7005-7883

Pro Comp 7005-7883 4.5" bs, can't wait to get em in the mail!!

 

I run 17x9, 0 offset, 5.0 backspace with 33's and come nowhere near to rubbing with no spacers