1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: RootUser's SW 2013 Build Silverbullet02's 2013 Baja T/X Access Cab 6MT Are you a Wizard? 2012 Tacoma 2wd Access Cab -- Building My Perfect Knockaround 12thman's build MJS's SuperWhite DCSB Build Thread

Lucario Runner's Supercharged going to Turbo JDM build.

Discussion in '2nd Gen. Builds (2005-2015)' started by Lucario Runner, Jan 1, 2018.

Page 37 of 80
  1. Dec 13, 2020 at 2:58 PM
    #721
    Lucario Runner

    #721
    Lucario Runner [OP] Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    20201213_162653.jpg
    Install is about 3/4 done. Cleaned up wiring and powered the gauge. All thats left is the signal for the light. I'm hoping the fuse 10a tail dash panel will be correct. I only stopped cause the wind is super strong right now. So now I can go back to playing cyberpunk.
    Also this is my new favorite thing.
    20201213_164739.jpg
     
    Lucario Runner, Dec 13, 2020
    #721
    loginfailed, BassAckwards, TodayWasTHeDaY and 2 others like this.
  2. Dec 13, 2020 at 4:40 PM
    #722
    HomerTaco

    #722
    HomerTaco also HomerTaco Vendor

    Joined:
    Mar 28, 2010
    Member:
    #34129
    Messages:
    45,875
    Gender:
    Male
    First Name:
    HomerTaco
    HomerTaco
    Vehicle:
    HomerTaco
    HomerTaco ...................................................................................................................................................... Core-Hurst short throw shifter & T-handle / Carbon Fiber Interior / custom console light / De-badged / leather interior / Heated Front seats / Red Line Hood Struts / Painted speaker grills /one-off TRD Satoshi Grill with 12-15 front-end swap/ Pioneer AVIC-X920BT HU / Scangauge II / Black LED Tails / Dash Mount for iPad mini / Safari Snorkel / Auto-pilot mode / Leer 100XQ Cap / 4x Innovations sliders / Rear Diff Breather Mod / front windows tinted to 35% / Brute Force Fab Hybrid Front Bumper / BAMF Rear Diff Skid / Budbuilt Skids / CBI Trail Master 2.0 rear hybrid bumper / Fox rr coils/ TC UCA's/ TC spindle gussets/ TC Cam Tab gussets / Dakar leafs / Defined Engineering shackles / All pro U bolt flip / Timbren Rear Bumpstops / BAMF LCA skids / Exhaust re-route / Fog Light anytime Mod / LowRange Off Road extended rear brake lines / ATO Shackle Flip / sectioned Bushwhacker flares / re-geared to 4.56 / ARB Front & Rear Locking Diff / ARB CKMA12 compressor / PrInSu full rack system / 1" body lift / Inchworm 4.7 crawlbox / twin stick FJ t-case / Davez off-road triple-stick kit/
    Wiring drives me nuts. I can do automotive electrical projects, I just need to be in the right frame of mind. My last project was wiring up the dual ARB compressor in the bedside cubby mount. Took me a few hours to get it all done right. :oops:
     
    HomerTaco, Dec 13, 2020
    #722
    Torspd likes this.
  3. Dec 13, 2020 at 7:04 PM
    #723
    Torspd

    #723
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    26,300
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    And I am always like, "Hurry up!" "Are you done yet!!?!?!" "Are we there yet???" Lol
     
    Torspd, Dec 13, 2020
    #723
    TodayWasTHeDaY and HomerTaco like this.
  4. Dec 14, 2020 at 1:25 PM
    #724
    TodayWasTHeDaY

    #724
    TodayWasTHeDaY Hoser

    Joined:
    Jul 10, 2017
    Member:
    #223673
    Messages:
    2,056
    Gender:
    Male
    First Name:
    Russ
    Calgary
    Vehicle:
    2015 DCSB SC M/T TRD Sport
    Crimpers like that are the cats ass. Helps make everything look pro!

    How are you liking the SC so far? Great job on all the mod installs, everything looks so well put together and clean :thumbsup:
     
    TodayWasTHeDaY, Dec 14, 2020
    #724
  5. Dec 14, 2020 at 3:50 PM
    #725
    Lucario Runner

    #725
    Lucario Runner [OP] Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    They are man crimpers for sure, sometimes gotta double fist it but its a tight crimp. Lol. Supercharger has been fun. Surprised many peps even myself. Per the boost gauge when it's at peak tq its a 5psi and at the end of the rev range its at 6.5-7psi (not jet in bypass and cooler weather?). This is with the stock trd tune so I feel there is potential even on the stock sized pulley with the hptuner. I also learned from @JustDSM that hptuner for the license needs more than the just the vin to license so you can tune. Its vin, calibration id, and one other thing I'm forgetting. Im not upset about it just a learning hurdle and food for thought if peps wanted to tune n/a then go supercharged. I did finish this today.
    20201214_170635.jpg
    Tail 10a in the dash fuse box was perfect for the light. Also learned one white wire is for the needle and the other w/the invertor is thr light.
     
    Lucario Runner, Dec 14, 2020
    #725
    loginfailed, BassAckwards, 05Taco4x4 and 2 others like this.
  6. Dec 14, 2020 at 3:58 PM
    #726
    JustDSM

    #726
    JustDSM Oderint Dum Metuant

    Joined:
    Jan 16, 2015
    Member:
    #146525
    Messages:
    3,218
    Gender:
    Male
    First Name:
    Justin
    Ogden, UT
    Vehicle:
    2023 Ford Raptor
    The 'love triangle':

    MPVI2 Serial Number, Calibration ID, and VIN.
     
    JustDSM, Dec 14, 2020
    #726
    Lucario Runner[QUOTED][OP] likes this.
  7. Dec 14, 2020 at 4:05 PM
    #727
    Lucario Runner

    #727
    Lucario Runner [OP] Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    That's right. I was looking at the zzperformance and their like $2.50 cheaper for credits than the hpt website and they need the mpv12 id. Thanks for clarifying mate.
     
    Lucario Runner, Dec 14, 2020
    #727
  8. Dec 15, 2020 at 3:45 PM
    #728
    mightytacoman

    #728
    mightytacoman Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,408
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    Couple companies offer that ~$2.50 off per credit. Hinson Motorsports was the 1st that I was aware of.
     
    mightytacoman, Dec 15, 2020
    #728
    Torspd and Lucario Runner[QUOTED][OP] like this.
  9. Dec 20, 2020 at 10:29 AM
    #729
    Lucario Runner

    #729
    Lucario Runner [OP] Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    20201220_121803_HDR.jpg
    Not much of a mod but its cleaner than an antenna. Unless I get that trd desert intake. I'll prob do some tuning later today, waiting for traffic to clear on the wangan.
     
    Lucario Runner, Dec 20, 2020
    #729
    loginfailed likes this.
  10. Dec 23, 2020 at 12:50 PM
    #730
    Lucario Runner

    #730
    Lucario Runner [OP] Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    20201221_172804.jpg
    20201221_172813.jpg
    Took some beauty shots
    20201221_172639_HDR.jpg
    For those wondering how small the battery is. Also did some measuring for a new titianium tie down I'm working on so I can put this one back in my 4runner so i can do race truck stuff with it.
    Front j hook about 8 1/2 in, back about 7in
    20201221_172657.jpg
    20201221_172711.jpg
    Retuned the truck with @JustDSM always hit it just right.
    20201222_134201.jpg
    Per the maf flow rate it converts this truck to make around 350 at the flywheel. Not too bad. ATM the moment I'm taking my cusco sway bar off my 4runner to see of it'll install in on the tacoma. The 4runner got a 3 way adjustable superpro sway bar vs the cusco which is not. After that its time to plan what tI add to the taco next year.
     
    Last edited: Dec 28, 2020
    Lucario Runner, Dec 23, 2020
    #730
    loginfailed, JustDSM, Torspd and 5 others like this.
  11. Dec 23, 2020 at 1:53 PM
    #731
    ChadsPride

    #731
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,315
    Vehicle:
    Sponsored by TacomaWorld.com
    Happy Bday Bro!!! :cheers:
     
    ChadsPride, Dec 23, 2020
    #731
  12. Dec 23, 2020 at 2:12 PM
    #732
    Lucario Runner

    #732
    Lucario Runner [OP] Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    Thank you brother!
     
    Lucario Runner, Dec 23, 2020
    #732
    ChadsPride[QUOTED] likes this.
  13. Dec 23, 2020 at 2:16 PM
    #733
    ChadsPride

    #733
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,315
    Vehicle:
    Sponsored by TacomaWorld.com
    Hope it's a great one! :proposetoast:
     
    ChadsPride, Dec 23, 2020
    #733
  14. Dec 23, 2020 at 2:25 PM
    #734
    Lucario Runner

    #734
    Lucario Runner [OP] Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    it is. Also jaos and projectmu came out with a bbk (front and rear) that I'm tempted to get to keep that max jdm factor, maybe belated bday present for myself.
    https://www.youtube.com/watch?v=sEsNJsl5ztg
     
    Lucario Runner, Dec 23, 2020
    #734
    ChadsPride[QUOTED] likes this.
  15. Dec 23, 2020 at 2:31 PM
    #735
    ChadsPride

    #735
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,315
    Vehicle:
    Sponsored by TacomaWorld.com
    Dang i wish my truck made nosies like that! :rofl:

    Approved af :D ​
     
    ChadsPride, Dec 23, 2020
    #735
    Torspd likes this.
  16. Jan 4, 2021 at 6:19 PM
    #736
    Lucario Runner

    #736
    Lucario Runner [OP] Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    20210104_153510.jpg
    3rd gen trd skid plate info for those interested.
    Ordered a 2.8 quickchange pulley from smoothflow. Looking at getting a Roush tensioner to assist in belt control and avoid a potential failure. Radium catch can also ordered so I can mock up the setup.
     
    Lucario Runner, Jan 4, 2021
    #736
    loginfailed likes this.
  17. Feb 1, 2021 at 4:21 PM
    #737
    Lucario Runner

    #737
    Lucario Runner [OP] Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    20210201_181034.jpg
    Upgraded to a titianium tie down. Much lighter the aluminum one. Gonna have to get new terminals too.
     
    Lucario Runner, Feb 1, 2021
    #737
    loginfailed, BassAckwards, not_nick and 2 others like this.
  18. Feb 6, 2021 at 3:33 PM
    #738
    Lucario Runner

    #738
    Lucario Runner [OP] Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    20210203_095038.jpg
    Added some thicc sauce today too. Old oil was amber and no presents on the magnet.
    20210206_171319.jpg
     
    Lucario Runner, Feb 6, 2021
    #738
    loginfailed, Torspd and mightytacoman like this.
  19. Feb 6, 2021 at 4:07 PM
    #739
    mightytacoman

    #739
    mightytacoman Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,408
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    Needs more air in them tires
     
    mightytacoman, Feb 6, 2021
    #739
  20. Feb 6, 2021 at 4:40 PM
    #740
    Lucario Runner

    #740
    Lucario Runner [OP] Resident Truck/SUV racer

    Joined:
    Jun 29, 2011
    Member:
    #59067
    Messages:
    7,182
    Gender:
    Male
    First Name:
    Robert
    San Antonio, TX or nearest race track
    Vehicle:
    06 Toyota 4Runner
    AFE stage II intake, APR X1, URD 70mm Throttle Valve (ported and knife edged), NST intake manifold spacer, URD spec U headers, Denso IKH20, URD fuel pump, APR fuel rail, URD Y pipe, URD spec u catback, lightweight water pump pulley, Greddy sandwich cooler plate, Earls oil cooler, IPT valve body, FJ TRD shocks, Cusco front and rear sway bars, Energy Suspension rear track rod bushings and rear link bushings, Carbotech pads, Stoptech ss brake lines, Stoptech slotted rotors, Motul 600 rbf, Limited Grill, Painted hatch cover by me, Painted valve covers by me, Cobra CB, TRD rad and oil cap, Escort 8500, Autometer oil psi and temp gauges, AEM wideband afr gauge, Flexpod, Pioneer 400w speakers.
    36 All around. Been like that since I got the tires discount didn't reset it and i haven't either. Lol.
     
    Lucario Runner, Feb 6, 2021
    #740
    mightytacoman[QUOTED] likes this.
Page 37 of 80
To Top