Taco Grande 3-link Build

Hey y’all, I pulled the trigger a few months ago on version 2.0 of my taco. I figured I would share it here. I “needed” something different so I got together with my buddy (Nick at @martecengineering on IG) and decided to go 3-link front and rear on locked/geared superduty d60 and sterling axles.
I was able to sell all of my mid-travel suspension/axles/wheels/tires in a day or two which helped kick things off. Some goals we had were to keep it as low as possible but maintain decent up travel which is right around 5” and to remember it’ll be my daily driver. So far the geometry is looking great with minimal bumpsteer or side to side swing during travel. It looks like it might be back on the road in another week or two

-Radflo 2.5x10” and 14” in rear with 2.0 bumps.
-arb lockers/5.38 gears
-Raceline Monster headlocks
-Nitto Trail Grapplers

 

Hot damn

 

What would you say is the cost, approximate, all said and done. I’ll never afford this, just wondering. That is some bad ass shit. Both rear wheels firmly on the ground with the front drivers 3 feet guessing off the ground lol

 

Don’t tell my gf, but in the 20k ballpark