Thoughts on OME lift?

Stock UCAs for now, everything is in spec, but like i said, going camberg soon hopefully. I'd like to get a little more caster in than i can get now.


I had to crib my 3 ton jackstands up about 14"(I used 4x6's and cinder blocks) and placed them at the rear of the truck where the hitch mounts to the frame. Also wheel chocked my front wheels so no tippy stuff happened. That was the best place I found to get and even lift on the back of the truck. I also had to crib my bottle jack a few times to get enough lift as well.

After all that was said and done, I still ended up having to put a bottle jack under the axle after the new leaf pack was installed to get the wheel back on because of the increase in spring size.