BD Scene lights? What are the options?

Hi, I currently have the rigid industry scene lights on the prinsu, and while they work fine, I'm venturing out and researching if there are any options that have less of a profile. My first stop is baja designs, but can't seem to find any that are lower profile than the rigids, like people using the S2's.

One thing I'm thinking is the BD rock lights, but I feel like I saw a bracket for the rock lights that angles them downward to use as scene lights.... but I can't seem to find that anywhere on their site. Was I having a hallucination?

Thanks in advance for any suggestions.

Here's the current rigid scene lights:

 

I’ve been researching and keep coming back to the ones you have. You find one on each side is enough or would two on each side be better?

 

I feel one on each side is enough. I have S2's off the rear of the prinsu and have them angled slightly outward so those light up the area towards the rear.

 

you might be thinking of the uptop ones?
https://www.uptopoverland.com/products/uptop-scenepod-2-0

 

The S2 is probably as low profile as it is going to get. The S1 is a little smaller all around, but the profile is pretty similar. There was a guy in another thread that had used our flushmount bezel to mount S2s directly into the Prinsu Rack. A very cool option for sure. It had me considering busting out the power tools this weekend, but I really like the adjustability that the standard S2 bracket has. That is what I run on the side of my Prinsu and I haven't found another option that provides the same adjustment while being a bit flusher. Aside from minor aesthetics, it is a perfect setup for me.

These options below are similar to what you have now, but not sure they are much slimmer, if at all.

https://www.bajadesigns.com/Products/Squadron-Pro-Angled-Flush-Mount-LED-Work-Scene.asp
https://www.bajadesigns.com/products/Squadron-Sport-Angled-Flush-Mount-LED-Work-Scene.asp

Hope this helps.