What Have You Done To Your 3rd Gen Today?

You do the welding yourself? Looks good !

 

So I cut the handle, feet off the new HF $31 air tank, plumbed the supply over to the bulkhead and then fab'd a new bracket to hold the tank. Going to drill a new 1/2 npt on the other side for the compressor input. Waiting for the bung. Getting cold tomorrow so I'm not sure 31* will let me finish this up. LOL
Zim

 

What are you using to compress?

 

Yep. They sell all their bumpers as a kit to weld together.

 

I got the Smittybuilt. $350 less than the ARB...lol
Zim

 

That's the way to do it right there. Outstanding and you built it.
Zim

 

I've looked at these, but I'm confused. Does the flip key have its own electronics and you have to pair it with your vehicle or do you drop in the circuit board from the stock key into this new housing? The red alarm button is not aligned with the lock/ unlock buttons on the stock key and the flip key shows them aligned.

 

Added sound deadening to the rear wall, more that 50% of the time I have my seats folded down and would eventually like to add a storage system. Road noise when the seats are down is much worse compared to seats up imo. Added ~14 pounds of Noico 80mil to the rear wall and on the back of the oem plastic wall with pockets.

Good results, Less road noise/exhaust noise from behind. I will be doing the doors and floor in the next few months when I get new speakers (probably Kicker CS). For now the Subaru/Kicker tweets are a good enough sound upgrade.

 

Maybe the below will help answer some questions?
https://m.youtube.com/watch?v=c8e0EfI9SHw

 

What’s your wheel and tire set up?

 

Installed new winter tires today, Nokian Hakkapeliitta r3 suv.
Actually perfect timing. We’re in the middle of a major winter storm today with ice, snow, and blizzard conditions.
Great traction, both on acceleration and braking. Very stable and predictable. Would definitely recommend them.

 

Nice, here is us in Alberta Canada middle of October

 

Cool avi. He's a tremendous actor with an inimitable style.

 

Test fit my Custom made sliders and Tepui that showed up the other day. Perfect fit.

 

Just finishing up the install of my rock sliders from @CaliRaisedLed. Very impressed with the build quality.

 

I added open cell foam to my vents. It decreased the road noise by several dBs according to my Sound Meter app.



I stole the idea (and the photos above) from here:

Jerzsubbie's 2018 Cement DCSB TRD OR **Lots of PICS & Links**

 

Yo that’s a great idea, I figured the mat on the back of the plastic trim (but in front of the vents) would help but this looks like a much better solution, along with the dead mat.

 

yes, mid October is good... But yesterday... And that's was just half of amount (Calgary) 18 in in total in my area. Fun to drive!!!

 

Edmonton area checking in - a bit jealous! If I can’t go anywhere, I’d be ok with a good ol’ Christmas snowstorm.

Stay safe!

 

Sure if not applied correctly