day1player’s cement build

I’m planning to do these exact wheels and tires when my stock tires are in need of replacement. Following your build and will look for when/if you solve the rubbing as I don’t want to have to deal with any rub at all. Looks good! DCLB OR in Cement 4L!

 

@SnuggleTruck Thank you! As far as the rub goes it is about 99% gone now. I only rarely ever hear it. That final adjustment I made to 15mm and 13mm actually worked pretty well, what I needed was an alignment. After I got an alignment, almost 0 rubbing.

 

Good to hear. Is the rub on the cab mount or just the wheel well plastics? I’m fine with heating and cutting some plastic on my truck but I’m not planning to do a CMC. Thanks!

 

Only rubs on the plastic. Only has ever rubbed on the plastic. And in this case, I have the factory mud guards which make it more likely to rub. And again, with the alignment, barely ever rubs

 

Awesome!! Thanks! At the 15 and 13mm adjustments what does that put the lift to in the front from stock height? From what I know the max height adjustment with the BP51 is 2”. Really looking forward to this lift, tire, wheel combo in my future!

 

If you ever take your camper shell off snap a couple pictures. I'm looking at getting the uptop alpha, my truck looks pretty similar minus the shell.. I really like the paint match.. how is the wind noise? Sunroof works fine still?

 

@Drumminguy81 I will take some photos for sure, but it's not likely to happen since I sleep in the back for trips and its mounted with a water resistant gasket.

I love the rack, it looks so great especially with the paint match. The wind noise is basically non-existent compared to the Front Runner I had on my previous truck. They have a few options for the front wind plate, some of them have cutouts for light bars. Since I was not planning on a lightbar on the roof, and wind noise was a concern for me, I got this solid one with no cutouts. Thats probably something to keep in mind. On the bright side if I decide later to get a light bar up there, I can just reach out to the UpTop guys and purchase a new wind plate. They bolt in so they are replaceable.

As far as the sunroof, it works perfectly. You will want to make sure you select their "Fresh Air" kit when you order your rack because that one comes with some adaptions to ensure the sunroof opens all the way.

 

How is the paint match? Is the color right? Paint holding up well?

 

The paint match is great. It looks like a perfect match.. My rack is coming up on 10 months old now, about 10k miles on the truck and there are no signs of wear, no chips or flaking paint. Its good quality

 

Great build Bro. Great looking truck