Max Tire Size w/ 3”/1” levelling

Finally bought my first Taco and looking for a little more ground clearance and more aggressive stance. Not doing a TON of off-roading other than hunting on old logging roads so not sure I really need a full suspension lift/upgrade which is why (along with the coat difference) I’m considering a 3”/1” levelling (be gentle die hard off roaders!)
From what I’ve read it sounds like I could go as big as a 285/75/16 without rubbing but wondered if anyone else has run that same setup before and has any feedback. Also curious whether a 6-10mm negative offset would help/hurt my case.

Thanks for the help!

-New Taco Guy

 

Welcome.
Check out this thread: https://www.tacomaworld.com/threads/3-1-lift-vs-3-level.422641/
Post #5 is a popular configuration here. More negative offset will give a more aggressive stance and will require more cutting.