Will I rub on uca’s with 2016 off-road 2inch lift and 285 75 r16 BFG ko2 with 1.25 spidertrax spacer

^^

 

UCA should be fine. Everywhere else, not so much.

 

Probably not
A guy I sold my 1.25 spacers too had a very similar setup but with even larger tires and he said he didn’t rub after the spacers

 

I don’t mind a little trimming. Any other combos y’all have in mind to make life a little easier?

 

Cab mount chop and trim the front end of the fender/ bumper about an inch

 

The TRD pro Tacoma, NOT 4runner wheels have been known to fit quite nicely with 285s even at stock height. Look into that.

 

Can you tell me more specifically his set up... taco year, wheels, lift, tires etc... It would help me out so much! Thank you.

 

I have 265/75r16's on OEM TRD-OR Wheels with 1.25" Spidertrax spacers, and the clearance is very close with the rear wheel well, UCAs have no issues. 285's will be much closer and would likely require trimming of the wheel wells.

 

Following! I wanna keep my 16 inch wheels and run 285s. I have a 2 inch lift up front and 1.5 in the rear.