(SOLD) 05 GX470 Build

GX SOLD







2005 GX470, Blizzard Pearl, w/ Nav-ML system, 2-owner, purchased at 99k

Prior to the GX I had been longtime Toyota driver, having learned to drive in a 3rd gen T4R 2WD, then gone to a 1st gen Tacoma PreRunner, and finally to my 2013 Tacoma 4x4 (Dec 2012). After selling the Tacoma fall 2019 in pursuit of getting back to an suv, I purchased my current GX. Blizzard pearl was not my first color choice given the recall issues with paint peel, but this one's paint was near pristine enough to overlook that. And the biggest focal point of mine, the frame, was near rust-free. Maintenance records were also well-documented.

Maintenance:
TB/WP/T-stat replaced (100k miles)
Denso rad/OEM hoses (OEM leaking, 100k miles)
Front/rear/xfer case fluids replaced along with new fill/drain plugs
CDL actuator disassembly/seals
Oil change
Engine/cabin air filters
New power steering reservoir/Valvoline maxlife atf
OEM Spark plugs (105k miles)
Duracell 94r AGM
Hewitt-Tech SAIS bypass
To do: passenger valve cover gasket, spark plug tube seals.

Suspension:
Ironman Nitro 2” “performance” (2.5-3” with below additions)
- 1/2” top plate spacer, driver side
- 1/4” top plate spacer, pass side
- SSO coil conversion rear
Energy Suspension poly bumps, front
Front sway bar relocation brackets

Armor:
RCI ifs skid (aluminum)
Ricochet off-road aluminum filler plate (for FJ)
Ricochet off-road aluminum LCA skids
RSG bolt-on angled sliders

Misc Exterior:
Front/Rear bumper chop
Trailer plug relocate to bumper fascia
Exhaust chop
Rear diff breather relocate
Aftermarket rear spoiler
JW Off-road tire carrier
DIY extrusion roof rack with Sherpa Equipment Co. mounting feet
Wells Visors
CBI ditch light mounts
Metaltech4x4 standard hitch reciever
Snorkel

Wheels/tires:
285/70/17 Toyo AT2
1” BORA spacers front/rear
Factory alloys

Interior mods:
Tuffy FJ center console
Carling 6 switch panel
Cupholder insert (craftedbymatt)
Driver side switch insert (sbeprecision)
Garmin mini dash cam
AEM voltmeter and GPS speedo, A-pillar
DIY stainless rear door folding table
Weatherheck floor liners (garbage)
Vinyl wrapped wood panels, aftermarket prado steering wheel
Ellis Precision shift knobs

Lighting:
MESO dome light v2 in 2nd gen Tacoma housing, color matched
Morimoto 35w HID kit 4k in low beams
Rigid ignite LED pods in rear bumper

Comms/Audio:
Kenwood TM281
Midland MXT400
Non-nav conversion,

$280 Alpine ILX-w650 7" Double DIN Touchscreen Digital Multimedia Receiver with Bluetooth, Apple CarPlay and Android Auto

Alpine ILX-w650
Skar audio 6.5” woofers front doors
Dayton audio 8ohm mids and tweeters from partsexpress
Sound Ordnance B8-ptd, driver seat