Lunar Mist, 6' topper with rack

I am looking to sell my lunar mist topper for a 6 foot first gen truck bed.
Now $500
Located in Northern Colorado. I would be open to a drive to sell if there is interest, but not without some cost and no more than a day trip.

-Side windows slide open and the window screens are in good condition
-Rear hatch has replaced gas tubes, the hatch pops right open, and the locks were replaced and come with two keys.
-The front glass window has two sliding windows that open like french doors and not the single square window opening.
-I built the rack on top to hold extra rear, and a standard size solar panel in the center. Right now the solar panel does not come included but any 40x20 panel would fit.
-I'll leave the two side lights on (Don't need those where I'm going)
-I also built two internal braces that support the weight of anything on top of the rack by distributing the load to the bed (pics attached) I've loaded 20, 16-foot deck boards on top without having to worry about cracking the fiberglass. The supports brace directly into where the rack mounts.
-I could also be convinced to give the cot/bed setup and storage in the bed to whoever takes the topper. I won't be needing that when its gone.
-Does not come with the Hi-lift or shovel on top, but ill leave the quick fist mount, and the loc-rack high-lift mount on back (with keys) so you can throw your own up there.

Comment or message me if you want to see anything else. I am only posting on TW for starters to see if other members have interest and I am not in a pinch to sell yet.


This pic shows the internal supports and cot/bed, and bulkhead storage. Not gucci overland rated, but it works.

 

Bump.
Now $500

 

Hey there, I'm down in Denver and I've got a 2nd gen access cab with 6 foot bed. Do you know what the fitment is like for a 2nd gen? The reason I ask is that this topper looks like it might not be an exact fit for your truck.

 

By the way I love your truck. You've gone an incredible job of improving ground clearance at all points on that little guy.

 

still for sale?

 

I don't know what the fitment is like for a second gen.
Its not a topper designed for exactly a first gen Tacoma but its decently close.

 

Sale is pending as of now