5100's front end installed price ?

I have my Bilstein 5100's for the front of my DCSB on order, but what would a decent
price be to have them installed on the oem springs ?

Also would an alignment be manditory ?

 

Labor should be approximately 2-3 hours. Plus alignment. $350 +\-

 

Hey thanks, So I understand from the details from the company I purchased the shocks
from that some (special tools ) Are required for installation. I know a spring compressor
must be used but is there some other weird tool that a shop would need to do the installation
correctly on the position of the lower spring perch ( notch )

 

Just a spring compressor.

 

Just make sure they don’t accidentally put the spring perch upside down.

 

Yes, hand the shop the install sheet.
Make sure you point out the orientation of the spring seat.

 

I did the job myself in my driveway. It's not very difficult.

 

me 2, didnt need a compressor. go on you tube.

 

Yes I understand, That it can be done without a compressor, but there was other work
to be performed at the same time and I just don't have the time to do it all.
I will make sure they have the install sheet and desired perch position. I want them
to check the front brakes anyway, Because I'm getting a fading pedal.
like air in the lines or a booster going bad. Could be just 8 year old fluid.
I have known the guy that runs this shop for a good many years and he's honest.

 

Install the clips for the position yourself, it takes a couple of minutes with a pair of pliers,that way you know it's on the right ride height. The shop can then install the stock springs and coilover with the other work.

 

Hey thanks thats a great idea.