Gauges not working?

So I got my 2014 Tacoma in a good amount of water at the beginning of the month.. about seat level in the cabin. Got winched out, and drove home good. Drove w/o issues for the next three days, but it randomly stalled out and started getting a P0335 code for the crankshaft position sensor, and would keep stalling when I’d put it into neutral. Took it to a shop and all they said was to just let it dry out and should be fine. But two days after the gauges stopped working, the abs, parking brake,& stability control lights went off & don’t go away. Anyone else ever had this problem?..

 

You could say the pooch has been screwed.

You have water / corrosion in connectors and may have damaged ECU(s). You should contact your insurance company as this is not going to be easy or cheap.

Or

You could go through the electrical system connector by connector and hopefully clean up the mess and repair and replace any defective components. ( this is going to take a long time ).

 

Best bet is to file a claim as mentioned. It can get expensive quick. Chasing electrical gremlins due to moisture intrusion is neither easy or a quick fix.

 

We are going to need a bigger bag of rice for this one!