Kelford cam install to full rebuilt engine with smaller pulley

Have ordered Kelford s/c cam and springs for hilux s/c .do I need to change any parts to allow for cam?

 

Valve springs

Edit: looks like you already mentioned springs, my apologies, still need more coffee lol

 

Cheers

 

Also, join us in here! Tons of great info for your s/c'd application

https://www.tacomaworld.com/threads/trd-magnuson-4-0-supercharger-tips-tricks-and-mods.518932/

 

Are those the same grinds that we have used for our S/C guys here in the States? If so you won't need to worry about lobe to head interference.

You may need to purchase lifters, or bucket shims, (whichever you guys call them) to properly set base circle lash.

Are you planning on doing it with the heads attached to the block?

 

Yes that was the plan

 

One of the few Aussie's I have heard of grabbing a set. Glad to see it.

Was on 1GRFE Club, on FB. Based out of AU. Didn't see anyone on there with the desire to go that far.

 

Cheers getting my transmission rebuilt in a couple of days and will install after . I have a question removing the pressure reducing screw to supercharger valve and installing vacuum to point of reference outlet from supercharger body will this change afr levels and cause a lean condition if not tuned for it?