1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

DD Tail as Turn DIY module

Discussion in 'Lighting' started by Dgr8wun, Feb 8, 2021.

  1. Feb 8, 2021 at 6:18 PM
    #1
    Dgr8wun

    Dgr8wun [OP] Active Member

    Joined:
    Nov 3, 2020
    Member:
    #345760
    Messages:
    40
    Anyone got this to work on their 3rd gen Tacoma with LED's front and back? I'm trying to figure out the correct resistor to use.
    So far I've tried 6 Ohm 50W resistors front and back and I get zero flash with all LED's = I'm guessing too much resistor at 12 Ohm.
    with a 6 Ohm 50W resistor in the front (all LED's), I get hyper blink when the lights are on.

    The only way I can get it to flash normal is to have an LED in the front with a 6 Ohm 50W resistor, rears have 1 LED in the turn signal and a regular bulb in the stop.

    Am I correct in assuming that I need a resistor in the 7 Ohm to 11 Ohm range?

    thanks.
     

Products Discussed in

To Top