R TURN SIG NOT WORKING HYPERFLASH ON DASH

Hi. I have an '07 Tacoma and last week my right turn signal went out. I replaced the bulb and it worked for a day. These are not LEDs. The dash signal flashes quickly, but no right front or rear signal.
Here is where it gets strange, if I press the 'Hazards" button, the dash flashes as normal.

I hope that someone can help. I am tired of getting flipped off and yelled "Nice signal Dick-head!" from drivers waitng to turn.

Thank you

 

Hand-signal by positioning your left arm out the window, bending your elbow so that your forearm is perpendicular. Essentially you’ll feel like you’re waving, but that tells everyone you’re turning right.

There was a recent thread of the same exact issue but I’ll see if I or anyone can find it. Or just answer lol

 

Welcome to TW.
Someone here should have a wiring diagram to help you. Maybe moisture in the relay?

 

I'll admit I'm old, but that used to be part of driving tests for licenses. No idea if they are still.

 

This would make since if you do NOT have Daytime Running Lights.
As the front and back turn signals are tied together.

Have you confirmed power to the socket?
I say this because, it’s easier to check this first.
As the flasher relay and harness are under the dash behind the fuse panel in the truck.
If you don’t have power to the socket, you are going to have get to the flasher and harness to test them.


Pull the Right Rear tail light. Unplug the connector.
Check Pin 1 for power. Blue/Yellow Wire
And pin 3 for Ground. White/Black Wire
(The grounds are tied together also. But you might as well check them)

If I had to guess. It’s a flasher relay or resistance problem.
Something is causing a bulb to stop working or burn out.