2020 Tacoma W/ JBL Rockford Fosgate DSR1 No Sound

Thanks. Yeah, I saw that already. It shows white and white red for left tweeter and then Grey and grey red for right tweeter. What I was curious about was where the two connectors connector, what color does the white from ATO3 correspond to in the factory harness, what does white red correspond to in the factory harness, etc. That way, when I took the stock tweeters out, I would know which of those two wires connected to the tweeter is positive and which is negative.

I can’t quite tell from your picture though. No worries. If it’s a pain I can wait until I get my ATO3 harness in and figure it out. I like to try to plan as much as possible. Lol

 

Dang sorry, cant seem to find what is what on the harness.

Hopefully this helps your question

 

That absolutely answers it! Thanks so much for that!

Looks like left tweeter is yellow for positive and red for negative and right tweeter is pink for positive and purple for negative.

Let’s hope the speaker wires on the tweeters themselves match up to those colors. Haha!!

Thanks again!

 

Well crap. I took my tweeters out and neither of them have red/yellow. Front driver is pink and purple, front right is violet/purple and violet/red. Now I’m really confused. Lol.

 

Thanks again for this info. Another question for you; did you do any of the tuning or time delay settings after installing it? I’m trying to figure out if I need to use the DSR1’s EQ, or just use the radio settings and the amp settings.

Also, here’s all of the correlations between the harnesses at each speaker and the factory harness back at the amp for you, or anyone else who runs across this. 2021 TRD Sport with JBL.

 

I just played around with the prefecttune app, didn’t change to much as the app eq was fine for me I set my gains and LP/HP filters everything else on my amp.


And thanks for the wire guide this helps

 

W

Welp. Looks like I’m in the same boat as you. Got everything hooked up and no sound. It’s definitely stopping within the DSR1 somehow. I did select the “reset to default” checkbox that you accidentally skipped. Still no sound. Yay. Lol

 

same here, really thought i found a solution but a dead end. i think its better to go with an aftermarket headunit which im going to do.

 

Yeah. New headunit will be my only other option that I know of if iDataLink and Rockford can’t get it figured out. Good news is they are actively working on it and communicating with me, so that keeps me hopeful. Hers to hoping it gets resolved soon!

Thanks again for all of your input!

 

were you able to find a solution?

 

Nope! Not yet. Spoke to iDataLink today and they’re working on finding a 2021 to do some testing on. They’re based in Canada and apparently dealerships are shut down still, or something along those lines. They have management in California, so they’re seeing what they can get their hands on.

I’m pretty bummed about it; I literally have everything hooked up and finished, just can get any sound output from the DSR1.

So, it’s just playing the waiting game now. I figured I’d give it a couple weeks and if things haven’t progressed any ill start looking into getting a different headunit and bypassing the DSR1 all together.

 

Not really looking forward to the idea of dropping another $1000+ for a headunit and all the harnesses and whatnot. Especially since I’m more than happy with the stock headunit. :|

 

Curios what setup you have: amp, speakers etc?

 

I have kenwood 6x9/6.5 speakers and a kicker sub in the back seat with 5 channel soundstream amp

 

Read through this thread and curious if anyone can lead me to a compatible subwoofer upgrade for my 2020 Limited with JBL. Just upgraded my speakers and want to upgrade the sub next. Assuming I can do this and get better sound without going down the road of finding a compatible amp.