What Have You Done To Your 2nd Gen Tacoma Today?

Looks good man. I want to do this but in the back of my mind I worry about sitting at idle and the kids in the back seat. What are your thought on this? Thanks!

 

Finally got the Highlift mounted. Mount kit has been sitting in the garage for months.

 

Update to the RokBlokz Mud Flaps Thread, after much field testing...
The Front Mud Flaps ripped off, the screws that came with the set are not long enough to hold.

I removed the front flaps, got longer stainless hex heads, 1.75" and 2.0", but they bottom out before all the slack is taken up. Loose is no good, clearance is too tight.

At this point, I guess next option is drill the truck cab sheet metal that is on the backside of the inside wheel well plastic...

Any opinions on that? Better Options than drilling?

 

Musubi3,
The Front Flap is 17 inches top to bottom, 12 inches wide. I just did a post on the field test of those front mud flaps, my passenger side flap ripped out on a right hand turn, the screws are just not holding in place. I pulled off both sides, got longer hex head 1/4 inch screws, but they bottom out too soon. My option is to drill into the steel behind or figure out another option.
Hope that helps.

 

You could return them

 

Took her out to play

 

whats it for?

 

SAD!!!!

 

Keep watching this: https://www.tacomaworld.com/threads/rci-off-road-spring-2021-group-buy-closed.701779/page-30 maybe could change tomorrow.

 

Nice. Any change in sound? I'm planning on doing this when I upgrade my tire size and i don't want to mess anything up lol. Nice job by the way.

 

Fluid change in both diffs and the T-case. Had 50K miles on the 75W-110 and it was still pretty clean even from the rear diff. Standard metal dust on the magnets-no shavings. Replaced with more of the same- Scamsoil 75W-110 in both diffs and a quart of

$28 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)

75W-90 in the T-case topped off by 75W-110.

 

Today, and over the course of the week...

SwitchPro 9100 installed
Decked Installed
Mounted ARB dual compressor to the back.
Alu Cab Fridge slide installed
Dometic CFX 35 installed..

 

After a week or so I applied a second coat of Aerospace 303 protectant to the dash of my ‘08 Tacoma.

 

It’s back up tonight if you want to order!

 

Where are these dragons? I might be able to get my lady out there....

 

Could think about moving that to the passenger side to distribute weight that may exacerbate the ‘taco lean’. Just a thought.

 

Spare tire on the other side, it weights more than the highlift.

 

Thank you! It is now on my agenda. Looks pretty freakin rad. Kudos to the creator.

 

its to delete the clutch accumulator, gives a better pedal feel

 

Picked up this used 4 piece aluminum custom made bed height bed rack. One side needs to get welded back to the bar.